Καλώδιο δικτύου Dexlan 858712 5 m Cat6a S/FTP RJ-45

The Dexlan 858712 5 m Cat6a S/FTP RJ-45 networking cable provides a durable connection for high-speed wired networks. Constructed to Cat6a specifications, the cable supports 10 Gigabit Ethernet over short to moderate distances and includes S/FTP shielding to reduce electromagnetic and crosstalk interference. Both ends are fitted with standard RJ-45 plugs compatible with routers, switches, network interface cards and patch panels, making it suitable for structured cabling in home and office environments.

Advantages

The S/FTP (shielded foil with overall braid) construction combines individual pair foil shielding with an overall braided shield, improving noise immunity in electrically noisy environments. Cat6a specification ensures higher bandwidth and lower alien crosstalk compared with Cat6, while the 5 m length offers a balance between reach and signal integrity for typical desk-to-switch connections. Standard RJ-45 terminations provide plug-and-play compatibility with common networking equipment.

Suitable for

Key specifications

How to use

Plug one RJ-45 connector into the network port of your device and the other into the corresponding port on a switch, router or wall outlet. Ensure connectors are fully inserted until the latch clicks to secure the connection. For structured installations, route the cable without tight bends and avoid running it parallel to power lines to minimize interference. If installing in permanent runs, verify whether solid or stranded conductor type matches patch panel and keystone jack requirements.

Recommendations

For best performance, avoid sharp bends and kinking; maintain a bend radius of at least four times the cable diameter. When used in environments with high electrical noise, ensure both ends are properly grounded through shielded equipment or connectors to take full advantage of the S/FTP shielding. Test links with a certified network tester after installation to confirm performance and continuity.