Microconnect B-FTP601O Καλώδιο δικτύου πορτοκαλί 1 m Cat6 F/UTP (FTP)

The Microconnect B-FTP601O is a 1 m Cat6 networking cable with RJ-45 connectors, designed for high-speed data transfer up to 10000 Mbit/s. It features F/UTP (B-FTP) shielding to reduce electromagnetic interference and is backwards compatible with Cat5e and Cat5. The cable is manufactured with latch protection to prevent connector damage during tight installations and comes in an orange color for easy identification.

Advantages

This Cat6 F/UTP cable is tested to the Cat6 standard (up to 250 MHz) and supports high transmission rates while limiting crosstalk and EMI. Latch protection increases durability when routing through confined spaces. The orange jacket improves visibility and cable management in both home and office environments.

Suitable for

• Connecting switches, modems or routers to patch panels, keystone jacks or wall outlets
• Small office and home network installations
• Entertainment systems and media streaming setups
• Environments requiring reduced electromagnetic interference

Key specifications

• Brand: MicroConnect
• Model: B-FTP601O
• Type: Cat6 (B-FTP / F/UTP shielded)
• Length: 1 m
• Connectors: RJ-45 to RJ-45
• Max data rate: up to 10000 Mbit/s
• Test frequency: up to 250 MHz (Cat6 standard)
• Colour: Orange
• Weight: 0.03 kg

How to use

Plug one RJ-45 connector into your network device (switch, modem or router) and the other into the destination port such as a patch panel, keystone jack or wall outlet. Ensure connectors click into place using the latch protection. For best results route the cable away from high-power electrical lines and sources of interference. Verify link speed and connectivity on connected devices after installation.

Recommendations

Use this shielded Cat6 cable for installations where EMI or crosstalk could affect performance. For permanent or structured cabling runs, ensure connectors and terminations meet the same category standards and avoid excessive bending or crushing of the cable.