Καλώδιο δικτύου Microconnect B-FTP510 γκρι 10 m Cat5e F/UTP (FTP)

The Microconnect B-FTP510 RJ-45 Cat5e 10 m Grey is a 10-metre Cat5e networking cable with RJ-45 connectors on both ends and F/UTP shielding to reduce electromagnetic interference. Designed for connecting switches, modems, routers and patch panels, this cable supports Cat5e testing up to 100 MHz and is backward compatible with Cat5. The grey cable includes latch protection to reduce the risk of connector damage during installations in tight spaces.

Advantages

F/UTP shielding reduces EMI and crosstalk, improving signal integrity in environments with potential interference. The cable is rated to Cat5e standards (up to 100 MHz) and remains compatible with Cat5 equipment. RJ-45 connectors on both ends and latch protection make installation straightforward and help prevent connector breakage. The 10 m length provides flexibility for typical office and home network layouts.

Suitable for

• Connecting switches, routers and modems
• Patch panels and keystone jacks
• Home and small office wired networks
• AV and entertainment device connections

Key specifications

• Standard: Cat5e (tested up to 100 MHz)
• Shielding: F/UTP (foil shielded twisted pair)
• Length: 10 m
• Connectors: RJ-45 — both ends
• Transfer rate: supports up to 1000 Mbit/s as per product data
• Colour: Grey
• MPN: B-FTP510, EAN: 5711045259715

How to use

Plug one RJ-45 connector into the network device (switch, router or modem) and the other connector into the destination device, patch panel or wall outlet. Ensure connectors are fully inserted until the latch clicks. Route the cable avoiding tight bends and sources of strong electromagnetic noise where possible. For permanent installations, secure the cable with appropriate clips or cable management accessories without compressing the shielding.

Recommendations

Use this shielded Cat5e cable in environments with potential EMI or where improved signal integrity is required. For best performance, avoid sharp bends, excessive tension and exposure to moisture; replace the cable if connector latches or shielding are damaged.