Καλώδιο Patch Digitus CAT 6 S/FTP DK-1644-005/BL

Future-oriented standards and high-end quality for your network: DIGITUS® Category 6 (Class E) patch cords offer ISO/IEC 11801 and DIN EN 50173 compliant performance up to 250 MHz. The cable uses copper conductors, supports PoE+, and features a transparent red plug with metal shielding for simple identification of Category 6. The LSZH (Low Smoke Zero Halogen) sheath reduces smoke and harmful gases in case of fire.

Advantages

These patch cords are manufactured and tested to Category 6 channel requirements, providing reliable performance characteristics including NEXT up to 250 MHz. Each cable has a molded boot with kink protection, strain relief and a latch protector to prevent lever breakage. The transparent red connector with metal shielding simplifies identification and offers robust contact shielding.

Key specifications

• Standard: ISO/IEC 11801, DIN EN 50173 Category 6 (Class E)
• Frequency range: up to 250 MHz
• Conductor material: Copper (Cu)
• Sheath: LSZH (Low Smoke Zero Halogen)
• Connector: transparent red plug with metal shielding
• PoE support: PoE+
• Features: molded boot, kink protection, strain relief, latch protection

How to use

Connect the patch cord between network devices or patch panels using the RJ45 connectors. Ensure connectors are fully inserted until the latch engages and use the molded boot to avoid sharp bends near the connector. Verify network compatibility with PoE+ if powering devices over Ethernet. For reliable performance, maintain proper cable routing and avoid excessive tension or tight bends.

Recommendations

Use these Category 6 LSZH patch cords in structured cabling installations that require compliance with ISO/EN channel specifications and where reduced smoke emission is important. For optimal results, pair with Category 6 compliant patch panels and switches and follow installation guidelines to maintain rated performance.