Καλώδιο Patch Digitus CAT 5e SF/UTP DK-1532-020/BL 2m

The DIGITUS Patch cord CAT 5e SF/UTP DK-1532-020/BL is a 2 m SF/UTP network cable with RJ-45 connectors on both ends. Manufactured and tested to ISO/IEC 11801 and DIN EN 50173 Category 5e specifications, this patch cord supports channel performance up to 100 MHz and is suitable for standard Ethernet cabling installations. The transparent blue colored plug with metal shielding enables easy visual identification of Category 5e.

Advantages

The cable is produced and tested to Category 5e (Class D) standards, ensuring compliance with ISO & EN channel specification requirements and reliable performance up to 100 MHz including NEXT characteristics. Each end features a molded boot with kink protection, strain relief and an integrated latch protector to reduce the risk of connector damage. SF/UTP shielding reduces electromagnetic interference for more stable data transmission.

Suitable for

• Ethernet patching in office and data center environments
• Linking switches, patch panels and network devices
• General network cabling where Category 5e performance is sufficient

Key specifications

• Standard: ISO/IEC 11801, DIN EN 50173 Category 5e (Class D)
• Frequency: up to 100 MHz
• Type: SF/UTP
• Length: 2 m
• Connectors: RJ-45 to RJ-45
• Product colour: Black (transparent blue colored plug for identification)
• Manufacturer part number (MPN): DK-1532-020/BL
• EAN: 4016032321323

How to use

Connect one RJ-45 plug to a network switch, patch panel or device and the other RJ-45 plug to the corresponding port on your equipment. Ensure connectors are fully inserted until the latch engages. Route the cable to avoid sharp bends and protect it from mechanical strain; use the molded boot strain relief and latch protector as intended to extend connector lifetime.

Recommendations

Use this DIGITUS CAT 5e SF/UTP patch cord for standard 100BASE-TX and similar Ethernet applications where Category 5e performance is required. Avoid running the cable in close parallel with high-voltage power lines to minimize interference and maintain optimal shielding effectiveness.