Καλώδιο δικτύου Lanberg PCF7-10CU-0025-S RJ-45 Cat7 0,25 m γκρι

The Lanberg PCF7-10CU-0025-S is a short, high-performance Cat7 networking cable designed for reliable, high-speed connections. At 0.25 m length with RJ-45 connectors on both ends, this grey straight-through cable supports data transfer rates up to 10000 Mbit/s and features S/FTP shielding to reduce electromagnetic interference and crosstalk in dense or noise-prone environments.

Advantages

The cable's Cat7 construction and S/FTP shielding provide enhanced signal integrity and reduced interference compared with lower-category cabling. Its compact 0.25 m length minimizes excess cable clutter in patch panels, wall plates, or between closely positioned devices. Standard RJ-45 connectors ensure wide compatibility with networking equipment, while the grey jacket offers a neutral appearance that integrates easily into most installations.

Suitable for

• Short patch connections between network switches and servers in server rooms or racks
• Connecting routers, modems or desktop devices where minimal cable slack is required
• High-speed LAN links requiring shielding to limit interference

Key specifications

• Cable type: Straight-through cable
• Category: Cat7
• Length: 0.25 m
• Connectors: RJ-45 to RJ-45
• Shielding: S/FTP (overall foil plus individually shielded pairs)
• Maximum data rate: up to 10000 Mbit/s
• Colour: Grey

How to use

Connect each RJ-45 end to the corresponding network ports on your devices, ensuring that connectors are fully seated until they click. Use this short cable for point-to-point links where devices are closely positioned, such as between switch ports and servers or patch panel connections. Avoid sharp bends near the connector ends and ensure the cable is not stretched under tension to maintain performance and connector integrity.

Recommendations

For optimal performance, use the Lanberg Cat7 cable in environments where shielding against electromagnetic interference is beneficial. Keep cable runs within the specified length and avoid coiling tightly; inspect connectors for secure engagement and replace the cable if physical damage to the jacket or connectors is observed.