SFP-πομποδέκτης BlueOptics SFP28-25G-LR-MR-BO 10000 Mbit/s 1310 nm

The BlueOptics SFP28-25G-LR-MR-BO is a compact fiber optic SFP28 transceiver module designed for high-speed optical links. It supports a maximum data transfer rate of 10000 Mbit/s, operates at a wavelength of 1310 nm and is housed in a silver metal casing. The module uses an SFP28 interface and features low weight and a 3.3 V input voltage, making it suitable for integration into network switches, routers and other compatible network hardware.

Advantages

The module provides a standardized SFP28 form factor for straightforward hot-pluggable installation and integration into MSA-compliant ports. Its single-mode optical design with a 1310 nm transmitter and receiver supports longer reach compared with multimode solutions. The metal housing offers mechanical durability and electromagnetic shielding while the low weight reduces stress on equipment slots. The transceiver is compatible with LC duplex connections when used with appropriate single-mode patch cords.

Suitable for

• High-speed Ethernet and fibre channel links up to 10 Gbit/s per channel
• Single-mode fiber connections requiring 1310 nm wavelength
• Use in SFP28-compatible switches, routers and storage systems
• Network upgrades where a compact, hot-pluggable transceiver is needed

Key specifications

• Interface type: SFP28
• Maximum data transfer rate: 10000 Mbit/s
• Operating wavelength: 1310 nm
• Connector type: LC duplex (requires appropriate patch cord)
• Housing material and colour: metal, silver
• Supply voltage: 3.3 V
• Weight: 0.002 kg

How to use

Insert the BlueOptics SFP28-25G-LR-MR-BO into an SFP28-compatible module slot on the powered-off or hot-pluggable network device following the device vendor's instructions. Connect a suitable single-mode LC duplex fiber patch cable to the transceiver's LC connector, ensuring correct transmit/receive alignment. After installation, verify link status on the host device and, if available, enable digital diagnostics to monitor operational parameters. Follow the hardware vendor's guidelines for firmware and compatibility settings to ensure reliable operation.

Recommendations

Use single-mode fiber patch cords and LC duplex connectors designed for 1310 nm transmission and ensure the host equipment supports SFP28 modules and any required digital diagnostic (DDM/DOM) functions. Handle the transceiver by the housing, avoid touching the optical interfaces, and store unused modules with dust caps to protect the optical ports.