Λογαριασμός Επικοινωνία
Το καλάθι σας
Αποστολή με DPD & FedEx
Βοήθεια; Ρωτήστε το AI

Μονάδα πομποδέκτη XFP BlueOptics XFP-10GLR-OC192SR-BO 10000 Mbit/s 1310 nm

Μονάδα πομποδέκτη XFP BlueOptics XFP-10GLR-OC192SR-BO 10000 Mbit/s 1310 nm
Μονάδα πομποδέκτη XFP BlueOptics XFP-10GLR-OC192SR-BO 10000 Mbit/s 1310 nm
Μονάδα πομποδέκτη XFP BlueOptics XFP-10GLR-OC192SR-BO 10000 Mbit/s 1310 nm
Μονάδα πομποδέκτη XFP BlueOptics XFP-10GLR-OC192SR-BO 10000 Mbit/s 1310 nm
Μονάδα πομποδέκτη XFP BlueOptics XFP-10GLR-OC192SR-BO 10000 Mbit/s 1310 nm
Μονάδα πομποδέκτη XFP BlueOptics XFP-10GLR-OC192SR-BO 10000 Mbit/s 1310 nm
Μονάδα πομποδέκτη XFP BlueOptics XFP-10GLR-OC192SR-BO 10000 Mbit/s 1310 nm
Μονάδα πομποδέκτη XFP BlueOptics XFP-10GLR-OC192SR-BO 10000 Mbit/s 1310 nm
Μονάδα πομποδέκτη XFP BlueOptics XFP-10GLR-OC192SR-BO 10000 Mbit/s 1310 nm
Μονάδα πομποδέκτη XFP BlueOptics XFP-10GLR-OC192SR-BO 10000 Mbit/s 1310 nm
Μονάδα πομποδέκτη XFP BlueOptics XFP-10GLR-OC192SR-BO 10000 Mbit/s 1310 nm
Μονάδα πομποδέκτη XFP BlueOptics XFP-10GLR-OC192SR-BO 10000 Mbit/s 1310 nm
Μονάδα πομποδέκτη XFP BlueOptics XFP-10GLR-OC192SR-BO 10000 Mbit/s 1310 nm
Μονάδα πομποδέκτη XFP BlueOptics XFP-10GLR-OC192SR-BO 10000 Mbit/s 1310 nm
119,66 €
The BlueOptics XFP-10GLR-OC192SR-BO is an XFP fiber optic transceiver module engineered for high-speed network links. It supports a maximum data transfer rate of 10000 Mbit/s and transmits at a wavelength of 1310 nm. The module is built in a durable metal housing finished in silver, complies with Ro... Περισσότερα
Απόθεμα 10 Κωδικός 1486548 Μάρκα BLUEOPTICS Μοντέλο XFP-10GLR-OC192SR-BO Εγγύηση 2 χρόνια
ΚατηγορίαΜονάδες transceiver δικτύου

Αποστολή & επιστροφές

Εκτιμώμενη παράδοση Τρίτη, 10 Νοεμβρίου
Θα ενημερώνεστε μέσω του αναλυτικού μας συστήματος παρακολούθησης
Τρόποι πληρωμής
Τραπεζική κάρταVisaMastercardPayPalApple PayGoogle PayΤραπεζική κατάθεση

The BlueOptics XFP-10GLR-OC192SR-BO is an XFP fiber optic transceiver module engineered for high-speed network links. It supports a maximum data transfer rate of 10000 Mbit/s and transmits at a wavelength of 1310 nm. The module is built in a durable metal housing finished in silver, complies with RoHS requirements, and operates from a 3.3 V supply. With a compact form factor and a weight of 20 g, it is suitable for space-constrained network equipment that requires reliable optical connectivity.

Advantages

This XFP transceiver delivers 10 Gbit/s performance over single-mode fiber at 1310 nm while maintaining a compact, lightweight metal enclosure for mechanical stability and heat dissipation. RoHS compliance ensures restricted hazardous substance content, and the standard XFP interface provides broad compatibility with network switches and routers that accept XFP modules. The 3.3 V operation and standardized connector arrangement simplify integration into existing optical line cards and chassis.

Suitable for

Key specifications

How to use

Before installation, ensure the host device supports XFP modules and that firmware or hardware compatibility is confirmed. Handle the transceiver by the housing, avoid touching the optical interfaces, and keep protective caps on fiber ports until connection. Insert the XFP module into the empty XFP slot until it seats and the module latch or retention engages. After powering the host device, verify link status and monitoring information via the host management interface. When removing the module, power down or follow hot-swap procedures recommended by the equipment vendor and replace protective caps on the optical ports.

Recommendations

Use single-mode fiber rated for the target reach and maintain clean fiber connectors to ensure optimal performance. Store and handle the transceiver in a static-safe environment, and consult the equipment vendor documentation for any supported optical power budgets or specific interoperability notes.

Κύρια σημεία
  • High-speed backbone links in data centers and carrier networks
  • Long-reach single-mode fiber connections requiring 1310 nm optics
  • Replacement or spare transceivers for equipment with XFP slots
  • Optical equipment testing and lab use where standardized XFP modules are needed
  • Interface type: XFP
  • Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
  • Operating wavelength: 1310 nm
  • Housing material and colour: metal, silver
  • Operating voltage: 3.3 V
  • Weight: 0.02 kg
Χαρακτηριστικά
Ethernet LAN
Yes
Βάρος
0.02 kg
Βάρος συσκευασίας
30 g
Βύσμα οπτικής ίνας
XFP
Ελάχιστη θερμοκρασία λειτουργίας
0 °C
Θερμοκρασία λειτουργίας (T-T)
0 - 70
Μέγιστη απόσταση μετάδοσης
10000 m
Μέγιστη θερμοκρασία λειτουργίας
70 °C
Μέγιστη ταχύτητα μεταφοράς δεδομένων
10000 Mbit/s
Μήκος κύματος
1310 nm
Μήκος κύματος Rx (μέγ.)
1310 nm
Μήκος κύματος Tx (μέγ.)
1310 nm
Πιστοποιητικά συμμόρφωσης
RoHS
Πρότυπο πομποδέκτη SFP
LR
Συμμόρφωση βιωσιμότητας
Yes
Σύστημα duplex
Full
Τάση εισόδου
3.3
Τεχνολογία καλωδίωσης Ethernet οπτικής ίνας
10GBASE
Τύπος διασύνδεσης
XFP
Τύπος διεπαφής Ethernet
10 Gigabit Ethernet
Τύπος πομποδέκτη SFP
Fiber optic
Υλικό περιβλήματος
Metal
Χρώμα προϊόντος
Silver
Ιστορικό τιμών τους τελευταίους 6 μήνες
Μονάδα πομποδέκτη XFP BlueOptics XFP-10GLR-OC192SR-BO 10000 Mbit/s 1310 nm
Τρέχουσα
119,66 €
Χαμηλότερη
119,10 €
Υψηλότερη
121,08 €
Μεταβολή 24 ωρών
0,00 €   0%
Εβδομάδα
+0,56 €   +0%
Μήνας
0,00 €   0%

Γράψτε μια αξιολόγηση

Βαθμολογία *
Το όνομά σας θα εμφανίζεται δημόσια – μπορείτε να χρησιμοποιήσετε ψευδώνυμο. Προσκαλούμε τους αγοραστές να γράφουν αξιολογήσεις. Τις ελέγχουμε πριν από τη δημοσίευση και δημοσιεύουμε επίσης τις αρνητικές.

Ίδια σειρά και εναλλακτικές

Δημοφιλή προϊόντα σε αυτή την κατηγορία

Πωλητής: UAB KUR LT · Laisvės pr. 125A, LT-06118 Βίλνιους, Λιθουανία · Κωδικός εταιρείας 303192950 · ΑΦΜ/ΦΠΑ ΕΕ LT100008198612 · Αποστολή από την ΕΕ (Λιθουανία)
WhatsApp
Messenger
Γεια σας, είμαι ο βοηθός AI του DistriNode. Μπορώ να σας βοηθήσω να βρείτε προϊόντα, να συγκρίνετε επιλογές, να δημιουργήσετε PDF προσφορών ή να ανοίξετε αιτήματα υποστήριξης.
Όλες οι κατηγορίες