Μονάδα πομποδέκτη SFP28 BlueOptics SFP28-25G-ERL-30-DL-BO 25000 Mbit/s

The BlueOptics SFP28-25G-ERL-30-DL-BO is a fiber optic transceiver module engineered for 25 Gbit/s class connectivity using the SFP28 interface. It supports high-speed data transfer up to 25000 Mbit/s and is intended for use in modern network infrastructures where low-latency, long-reach fiber links are required. The module is compatible with SFP28 ports on switches, routers and servers and is designed to provide reliable fiber connectivity in data center, campus and enterprise environments.

Advantages

This SFP28 transceiver delivers a standardized SFP28 form factor for straightforward insertion into compatible ports and supports up to 25 Gbit/s data rates for high-throughput links. Its fiber-optic design enables longer reach and immunity to electromagnetic interference compared with copper connections. The module’s compact size and interoperability with SFP28 interfaces make it convenient for upgrading existing hardware to higher-speed links without replacing chassis or line cards.

Suitable for

• 25 Gbit/s uplinks between switches and aggregation devices
• High-performance server-to-switch connections in data centers
• Long-reach fiber links where optical transmission is required
• Network equipment that accepts SFP28 transceiver modules

Key specifications

• Interface type: SFP28
• Maximum data transfer rate: 25000 Mbit/s (25 Gbit/s)
• Fiber optic transmission for long-reach connectivity
• Compact SFP28 form factor for hot-pluggable installation

How to use

Install the BlueOptics SFP28-25G-ERL-30-DL-BO by inserting the module into a compatible SFP28 port until it clicks into place. Connect the appropriate single-mode or multimode fiber patch cable to the transceiver’s optical port, taking care to match transmit and receive ends. Configure the connected network device for the desired link speed and duplex settings if required; most modern devices will auto-negotiate 25 Gbit/s when using the SFP28 form factor. Monitor link status via the host device to confirm a successful optical connection.

Recommendations

Use compliant fiber cables and keep connector endfaces clean to maintain optimal signal quality. Verify compatibility with the host device’s SFP28 port and firmware before deployment. For long-distance links, consult device and fiber specifications to ensure the transceiver’s optical budget meets the required reach.