Μονάδα πομποδέκτη SFP+ BlueOptics BTI-10GER-DD-SFP+ 10000 Mbit/s

The BlueOptics BTI-10GER-DD-SFP+ 10000 Mbit/s is a fiber optic SFP+ transceiver module designed for 10 Gigabit Ethernet links. It supports a maximum data transfer rate of 10,000 Mbit/s and uses LC fiber connectors. The module is finished in a silver housing, has an SFP+ form factor and a compact weight of approximately 20 g. With a mean time between failures (MTBF) of 1,000,000 hours, the transceiver is intended for stable operation in network equipment that accepts SFP+ modules.

Advantages

This SFP+ transceiver offers high-speed data transmission up to 10 Gbit/s in a compact SFP+ form factor compatible with many switches and routers that accept hot-pluggable modules. The LC fiber connector and support for distances up to 40,000 m make it suitable for both short- and long-reach fiber links depending on the fiber type used. Its silver metal housing provides physical durability while the specified MTBF indicates long-term reliability for continuous network operation.

Suitable for

Key specifications

How to use

Insert the BlueOptics SFP+ transceiver into a compatible SFP+ port on a switch, router or network interface card while the host device is powered off or following the host vendor's hot-plug procedure. Connect LC-terminated fiber cables to the module's LC connector, ensuring correct transmit/receive orientation. Verify link status and speed in the host device management interface and monitor the connection for signal integrity. Follow standard ESD precautions when handling the module and protect the fiber ends with dust caps until connection.

Recommendations

Use single-mode or multi-mode fiber that matches the module's optical specifications and the distance requirements. Verify compatibility with the host device firmware and supported SFP+ module list. For reliable long-distance links, use proper fiber attenuation budgeting, clean connectors before mating, and perform link tests after installation.