Μονάδα πομποδέκτη SFP+ BlueOptics 330-2405 10000 Mbit/s 850 nm

The BlueOptics 330-2405 SFP+ transceiver module supports 10000 Mbit/s data transmission over multimode fiber using an 850 nm wavelength. Designed for short-range links in data centers, server rooms and enterprise networks, the module provides a compact SFP+ form factor and a lightweight silver housing that fits most compatible switches, routers and optical equipment. The transceiver enables hot-pluggable installation and is intended for reliable high-speed connectivity on short-reach fiber runs.

Advantages

The module offers a standardized SFP+ interface for easy integration into existing network hardware, supporting up to 10 Gbit/s throughput for bandwidth-intensive applications. Its 850 nm wavelength is optimized for short-range multimode fiber links, delivering low-latency optical transmission. The compact and lightweight design reduces port space and simplifies deployment in dense equipment racks.

Suitable for

• Short-range 10 Gbit/s links between switches and servers in data centers
• Aggregation and access layer connections in enterprise networks
• Upgrading optical ports on network appliances to 10 Gbit/s
• Multimode fiber installations within single buildings or campus sites

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s
• Wavelength: 850 nm
• Optical range: suitable for short-reach multimode fiber links
• Form factor: SFP+ hot-pluggable module
• Weight: 0.02 kg
• Color: silver

How to use

Power down the port only if the host device requires it; otherwise insert the SFP+ transceiver into the empty SFP+ slot until it seats firmly and the retention latch secures it. Connect a compatible multimode fiber patch cable with matching connectors to the transceiver's optical port, observing correct polarity. Configure the host interface for 10 Gbit/s operation if necessary and verify link status through the device management interface or LEDs. For removal, disengage the latch and pull the module straight out to avoid damaging the connector.

Recommendations

Use the transceiver with multimode fiber rated for short-reach 850 nm operation and ensure fiber connectors and patch cords are clean before connection. Check compatibility lists for the target switch or router to confirm supported SFP+ optical modules. Avoid excessive force during insertion and removal and operate within the equipment's specified temperature range.