Μονάδα πομποδέκτη οπτικής ίνας BlueOptics JD092A-BO 10000 Mbit/s SFP+ 850 nm

The BlueOptics JD092A-BO is a fiber optic SFP+ transceiver module designed for 10G high-speed data transmission. It supports a maximum data rate of 10000 Mbit/s, operates at an 850 nm wavelength and uses an SFP+ interface with an LC Duplex connector for multi-mode fiber links. The module is RoHS compliant, CE and FCC compatible according to the manufacturer's specifications, and weighs approximately 20 g, making it a compact option for network upgrades or replacements that require 10GBASE-SR functionality.

Advantages

The transceiver provides a standardized SFP+ form factor compatible with equipment that accepts 10GBASE-SR modules, enabling straightforward installation into switches, routers and storage interfaces. Operating at 850 nm for multi-mode fiber, it supports short-reach 10 Gbit/s links and is manufactured to meet MSA electrical and mechanical specifications. Compliance with RoHS and common industrial standards supports integration into regulated environments, while the lightweight silver housing facilitates easy handling and deployment.

Suitable for

Key specifications

How to use

Install the BlueOptics JD092A-BO by inserting the SFP+ module into a compatible SFP+ slot until it latches; then connect LC Duplex multi-mode fiber patch cords to the module and the corresponding remote transceiver or patch panel. Ensure the host device supports 10GBASE-SR and that any required firmware or software settings allow third-party transceivers. Power up the connected equipment and verify link status through the host device interface or LED indicators. For diagnostics, use the host’s monitoring tools if Digital Diagnostic Monitoring (DDM/DOM) is supported by the hardware.

Recommendations

Use quality multimode fiber (OM3/OM4 where appropriate) and compatible LC Duplex patch cords to achieve optimal link distance and signal performance. Confirm hardware compatibility and enable any required port settings before deployment. Handle the transceiver with ESD precautions and keep dust caps on fiber connectors when not in use to maintain performance and reliability.