Μονάδα πομποδέκτη δικτύου οπτικής ίνας BlueOptics SFP28-25G-ER-MA-BO 25000 Mbit/s

The BlueOptics SFP28-25G-ER-MA-BO is a fiber optic network transceiver module engineered for 25 Gbit/s data links. With an SFP28 interface and a compact, lightweight design (approximately 40 g), this module supports high-speed optical transmission for long-reach connections. It is intended for use in switches, routers and optical line systems that accept SFP28 form-factor modules and require a 25,000 Mbit/s throughput over fiber.

Advantages

The module provides a standardized SFP28 form factor for compatibility with a wide range of network equipment and enables 25 Gbit/s data transfer for bandwidth-demanding applications. Its fiber optic operation supports longer distances than copper-based interfaces, offering lower signal attenuation for extended links. The compact and lightweight construction simplifies installation and reduces space and weight constraints in dense chassis environments.

Suitable for

• Upgrade paths from 10G to 25G links in data center networks
• Long-reach fiber connections between aggregation switches and core routers
• High-throughput server-to-switch uplinks and inter-switch connections

Key specifications

• Interface type: SFP28
• Maximum data transfer rate: 25000 Mbit/s
• Optical medium: fiber optic
• Typical use: long-reach optical transmission
• Weight: 0.04 kg

How to use

Insert the SFP28 module into a compatible SFP28 slot on your switch, router or optical transceiver shelf following the equipment manufacturer’s hot-swap guidelines. Connect the appropriate single-mode or multi-mode fiber patch cable to the module’s optical port, ensuring correct connector type and polarity. Configure the network device to enable the 25 Gbit/s port and verify link status and negotiated speed through the device management interface or console.

Recommendations

Use certified single-mode fiber and compatible connectors for long-distance links, and verify transceiver compatibility lists provided by your network equipment vendor. Observe ESD handling procedures when installing the module and keep protective dust caps on the optical ports until cabling is complete.