Module πομποδέκτη SFP BlueOptics SFP-10GD-LRM-BO 10000 Mbit/s 1310 nm

The BlueOptics SFP-10GD-LRM-BO is an SFP+ fiber optic transceiver module designed for 10 Gbit/s links. It operates at 1310 nm wavelength and supports multimode fiber connections with LC duplex connectors. The module is compatible with MRV hardware platforms that support the 10GBASE-LRM standard and is supplied in a compact silver housing with a lightweight design of approximately 20 g. BlueOptics transceivers conform to CE, FCC and RoHS standards and include digital diagnostic monitoring features where supported by the host device.

Advantages

The module provides stable 10 Gbit/s data transmission over multimode fiber up to the expected LRM reach, using industry-standard SFP+ form factor and LC duplex interfaces for easy integration. Components and assembly follow MSA guidelines to maintain interoperability with MRV equipment while offering digital diagnostics (DDM/DOM) for real-time monitoring of operating parameters such as supply voltage, laser bias current, optical output and input power, and temperature. The small, lightweight metal housing supports straightforward installation and passive cooling in dense network equipment.

Suitable for

Key specifications

How to use

Insert the SFP-10GD-LRM-BO module into any compatible SFP+ slot on a switch, router or other network device while the device is powered down or following the host manufacturer’s hot-plug instructions. Connect LC duplex multimode fiber patch cords to the module’s ports, observing correct transmit/receive orientation. Configure the host device as required for 10GBASE-LRM operation and verify the link status through the device management interface. If available, read digital diagnostic values via the host to monitor optical power, temperature and supply parameters.

Recommendations

Use multimode fiber compliant with the LRM specification and high-quality LC duplex patch cords for optimal reach and signal quality. Verify host compatibility with MRV 10GBASE-LRM SFP+ modules and enable DDM/DOM support on the device firmware to access diagnostic information. Avoid bending fiber beyond manufacturer bend-radius limits and follow ESD precautions when handling the transceiver.