Microconnect MC-UTP6A03P Καλώδιο δικτύου μωβ 3 m Cat6a U/UTP (UTP)

The MicroConnect MC-UTP6A03P is a 3 m Cat6a networking cable designed for high-speed data transfer up to 10000 Mbit/s and bandwidth support up to 500 MHz. The cable uses U/UTP construction to reduce interference and comes in a purple jacket. Gold-plated RJ-45 connectors and 50μ'' contacts ensure reliable signal transfer, while meter markings on the boot make cable length easy to identify.

Advantages

This Cat6a patch cable supports 10Gbit connections and wide bandwidth for data-intensive networks. Gold-plated RJ-45 connectors with 50μ'' contacts improve conductivity and corrosion resistance. Latch protection prevents accidental clip breakage, and the printed meter markings on the boot simplify installation and cable management. U/UTP shielding minimises electromagnetic interference in typical office and data centre environments.

Suitable for

• 10G Ethernet links between switches and servers
• High-bandwidth applications such as video streaming and large file transfers
• Office LANs, server rooms and data centres
• Patch panels and structured cabling installations

Key specifications

• Length: 3 m
• Standard: Cat6a (UTP/ U/UTP)
• Maximum data rate: 10000 Mbit/s (10Gbit)
• Bandwidth: up to 500 MHz
• Connectors: RJ-45 to RJ-45, gold-plated contacts (50μ'')
• Colour: Purple
• Weight: 0.07 kg

How to use

Connect one end of the MicroConnect Cat6a cable to the RJ-45 port of your network device and the other end to the target device or patch panel. Ensure the latch fully clicks into place and route the cable to avoid tight bends or kinks. Use the meter markings on the boot to verify or document installed cable length during setup.

Recommendations

For optimal performance, use this Cat6a cable in installations that require 10Gbit connections and maintain proper cable management to prevent excessive bending and electromagnetic interference. Avoid running the cable in parallel with high-voltage power lines for extended distances.