Microconnect MC-SFTP6A005B Καλώδιο δικτύου Μπλε 0,5 m Cat6a S/FTP (S-STP)

The MicroConnect MC-SFTP6A005B is a Cat6a S/FTP patch cable, 0.5 m long, designed for high-speed network links. It supports data transfer rates up to 10000 Mbit/s and bandwidths up to 500 MHz. The cable is fitted with gold-plated RJ45 connectors, 50µ'' plating for reliable contact, an integrated latch protection to prevent clip breakage, and meter markings on the boot for quick length identification. The blue jacket provides a visible, standard colour for cable management.

Advantages

This Cat6a S/FTP cable offers enhanced shielding to reduce electromagnetic interference, 50µ'' gold-plated RJ45 connectors for improved contact and corrosion resistance, and a reinforced latch protector to increase connector durability. Short 0.5 m length is suitable for rack or desk connections where minimal slack is required, and the meter marking on the boot simplifies installation and inventory management.

Suitable for

• 10 Gbps Ethernet connections between switches and servers
• High-bandwidth workstation or NAS connections
• Short patch runs in racks, patch panels or desktop setups
• Environments requiring reduced EMI with S/FTP shielding

Key specifications

• Standard: Cat6a (S/FTP)
• Length: 0.5 m
• Data rate: up to 10000 Mbit/s
• Bandwidth: up to 500 MHz
• Connectors: RJ-45 to RJ-45, gold-plated, 50µ''
• Colour: Blue
• Weight: 0.02 kg
• MPN: MC-SFTP6A005B
• EAN: 5704174257264

How to use

Connect one end of the MicroConnect Cat6a patch cable to the RJ45 port of your network device (switch, router, server or NIC) and the other end to the corresponding port. Ensure the latch clicks into place and route the cable to avoid sharp bends or crushing. Use the short 0.5 m length for tidy connections between adjacent rack units, patch panels or desk-mounted equipment.

Recommendations

For optimal performance, avoid running the cable parallel and close to mains power lines or large electrical equipment. Use appropriate cable management and maintain bend radius greater than the cable diameter. The S/FTP shielding is effective against EMI when both ends are terminated correctly.