Microconnect B-UTP620Y Καλώδιο δικτύου κίτρινο 20 m Cat6 U/UTP (UTP)

The Microconnect B-UTP620Y RJ-45 Cat6 20m Yellow is a 20-meter U/UTP network cable designed for high-speed data transfer up to 10000 Mbit/s. It is intended for connecting network devices such as switches, modems or routers to each other or to a network infrastructure via patch panels, keystone jacks or wall outlets. The cable is tested to the Cat6 standard (up to 250 MHz), is backward compatible with Cat5e and Cat5, and has latch protection to reduce the risk of connector damage during installation in tight spaces.

Advantages

The cable supports Cat6 performance up to 250 MHz and is compatible with 10/100/1000Base-T(X) networks, providing a reliable path for high-speed data. RJ-45 connectors on both ends facilitate standard Ethernet connections. U/UTP construction helps reduce interference while the bright yellow jacket improves visibility and identification in crowded cable runs. Latch protection on the connectors prevents accidental damage during installation.

Suitable for

• Connecting switches, routers and modems
• Patch panel and keystone jack terminations
• Home and small office networks
• Entertainment systems and media streaming setups

Key specifications

• Length: 20 m
• Connectors: RJ-45 — RJ-45
• Cabling technology: 10/100/1000Base-T(X)
• Performance class: Cat6 (tested up to 250 MHz)
• Data rate: up to 10000 Mbit/s
• Shielding: U/UTP
• Colour: Yellow
• Weight: 0.32 kg

How to use

Connect one RJ-45 end of the Microconnect Cat6 cable to the network device (switch, router or modem) and the other end to the target device, patch panel or wall jack. Ensure connectors are fully inserted until the latch clicks to secure the connection. Route the cable to avoid sharp bends and excessive tension; when passing the cable through tight spaces, use the latch protection to prevent connector damage.

Recommendations

For best performance, avoid running the cable in parallel with high-voltage electrical lines and limit bending radius to the manufacturer’s recommended specifications. Use the yellow colour to mark critical links or to separate network segments for easy identification.