Microconnect B-FTP615G Καλώδιο δικτύου πράσινο 15 m Cat6 F/UTP (FTP)

The MicroConnect B-FTP615G is a 15 m Cat6 networking cable with F/UTP (B-FTP) shielding and RJ-45 connectors on both ends. It supports Cat6 standard testing up to 250 MHz, offers data transfer rates up to 10000 Mbit/s and is backwards compatible with Cat5e and Cat5. The cable is green and built with latch protection and a durable construction for reliable connections between devices such as switches, modems, routers, patch panels, keystone jacks or wall outlets in home and small office networks.

Advantages

Shielding (F/UTP) reduces electromagnetic interference (EMI) and helps prevent crosstalk, improving signal integrity and reducing transmission errors. The Cat6 specification and testing to 250 MHz ensure higher performance than Cat5e/Cat5, while RJ-45 connectors on both ends and latch protection make installation easier in confined spaces. The 15 m length provides flexibility for typical office and home setups.

Suitable for

• Connecting switches, routers or modems to patch panels or wall outlets
• Small office and home network installations
• Wired entertainment setups (smart TVs, media players, networked game consoles)
• Environments where EMI shielding is required

Key specifications

• Standard: Cat6 (tested up to 250 MHz)
• Shielding: F/UTP (foil overall with unshielded pairs) — B-FTP
• Connectors: RJ-45 to RJ-45
• Length: 15 m
• Maximum data rate: up to 10000 Mbit/s (manufacturer specification)
• Colour: Green
• Weight: 0.35 kg

How to use

Plug one RJ-45 connector into your network device (switch, router, modem, or wall outlet/patch panel) and the other end into the target device. Ensure connectors click into place with the latch protection to secure the connection. Route the cable avoiding sharp bends and high-tension points; when passing through tight installation spaces, the latch protection reduces the risk of connector damage.

Recommendations

For best performance, avoid running the cable parallel to high-voltage power lines and keep bend radius above the manufacturer’s minimum to prevent signal degradation. Use the shielded cable in environments with potential electromagnetic interference to reduce crosstalk and transmission errors.