Καλώδιο UTP Cat.6 ROLINE 300m συμπαγές AWG23

ROLINE UTP Cable Cat.6 ROLINE 300m Solid Wire AWG23 is a 300-metre U/UTP structured building wiring cable with eight solid copper conductors (AWG23) and a grey jacket. Designed for Ethernet networks, this Cat6 cable provides controlled impedance of 100 Ω to support reliable high‑speed data transmission in homes, offices and commercial installations.

Advantages

The cable uses solid copper conductors (AWG23) arranged in eight lines to maintain consistent signal quality over longer runs. U/UTP construction reduces external electromagnetic interference, and the 100 Ω impedance meets standard requirements for Cat6 networking. The 300 m reel format is suitable for page‑long installations and structured cabling projects.

Suitable for

• Ethernet LAN installations (Cat6)
• Structured building cabling for offices and data closets
• Long cable runs requiring solid conductor stability
• Patch panels and keystone jack terminations (requires appropriate connectors)

Key specifications

• Cable type: U/UTP Cat6
• Length: 300 m
• Conductor: 8 lines, solid copper, AWG23
• Impedance: 100 Ω
• Colour: Grey
• Connectors: none (bulk cable)

How to use

Cut the required length from the 300 m reel, strip the outer jacket carefully without nicking the conductors, and terminate each conductor into Cat6‑rated keystone jacks or patch panel ports following the T568A/T568B wiring standard. Use a cable tester after termination to verify continuity and pair integrity. For wall runs or conduit installations, follow local building codes and cable routing best practices.

Recommendations

For best performance, avoid sharp bends and excessive pulling tension during installation, maintain separation from power lines to reduce interference, and use Cat6‑rated connectors and hardware. Verify network requirements to ensure Cat6 performance meets your planned throughput and distance needs.