Καλώδιο Patch Cord Digitus CAT 6 U/UTP LSZH 0,5m 10 τεμ.

The DIGITUS Patch Cord CAT 6 U/UTP LSZH 0.5 m (pack of 10) is a short patch cable designed for reliable network connections in structured cabling environments. It is manufactured and tested to ISO/IEC 11801 and DIN EN 50173 Category 6 standards, delivering performance up to 250 MHz and supporting PoE+ applications. The cable uses copper conductors and features a transparent red RJ-45 connector for easy identification of Category 6.

Advantages

The LSZH (Low Smoke Zero Halogen) outer sheath provides improved fire behaviour and reduced smoke emissions. Category 6 performance is verified up to 250 MHz, including characteristics such as near end crosstalk (NEXT). Each cable has a molded boot with kink protection, strain relief and a latch protection to prevent breaking of the latching lever. The U/UTP design and copper conductor ensure stable data transmission for 10/100/1000Base-T(X) networks.

Suitable for

• Short links in patch panels and switches
• Server racks and network closets
• PoE and PoE+ powered devices
• Gigabit Ethernet (10/100/1000Base-T(X)) connections

Key specifications

• Standard: ISO/IEC 11801, DIN EN 50173 Category 6
• Frequency: up to 250 MHz
• Length: 0.5 m
• Conductor: Copper (Cu)
• Cabling: U/UTP
• Connectors: RJ-45 to RJ-45
• Sheath: LSZH (Low Smoke Zero Halogen)
• Colour: Grey cable, transparent red connector
• Pack quantity: 10 pieces
• Suitable for: 10/100/1000Base-T(X), PoE+

How to use

Connect one RJ-45 plug of the patch cord to the network port of a switch, router or patch panel and the other plug to the device or port you wish to link. Use the 0.5 m length for short patching runs within racks or between adjacent equipment. Ensure the latch clicks into place and route the cable to avoid sharp bends; the molded boot provides kink protection and strain relief.

Recommendations

For best performance, use these CAT 6 patch cords within an installed Category 6 channel and avoid excessive bending or tensile loads. Store and install in dry environments and consider LSZH cables where reduced smoke and halogen-free behaviour is required by local safety standards.