Καλώδιο δικτύου LogiLink 1,5m RJ-45 Cat6 λευκό

Patch Cable Cat.6 S/FTP PIMF PrimeLine white 1.50m LogiLink® is a shielded RJ45 network cable designed for reliable high-speed data transmission over short distances. The 1.5 m cable uses AWG 27/7 bare copper conductors and S/FTP (shielded foiled twisted pair with overall braid) construction to reduce electromagnetic interference. The outer jacket is LSZH (low smoke zero halogen), and the cable complies with ISO/IEC 11801, EN50288 and TIA/EIA 568-B.2-1 standards.

Advantages

The cable combines Cat6 performance with S/FTP PIMF shielding for improved noise suppression and stable signal integrity. Gold-plated RJ45 connectors provide secure contacts while the AWG 27/7 bare copper conductors ensure consistent conductivity. The LSZH jacket lowers toxic fumes in case of fire and the 1.5 m length is convenient for connections between nearby devices in home or office environments.

Suitable for

• Connecting PCs, switches and routers over short distances
• Home and small office wired Ethernet setups
• High-speed applications requiring Cat6 cabling, such as streaming and online gaming
• Environments where reduced smoke and halogen-free materials are preferred

Key specifications

• Standard: Cat.6 (ISO/IEC 11801, TIA/EIA 568-B.2-1)
• Shielding: S/FTP (PIMF) — foil around each pair plus overall braid
• Conductor: Bare copper, AWG 27/7
• Connector: RJ45 — both ends
• Length: 1.5 m
• Jacket: LSZH (low smoke zero halogen)
• Colour: White
• Weight: 50 g

How to use

Plug each RJ45 connector into the corresponding Ethernet ports on your devices (for example, PC to switch or router). Ensure connectors are fully inserted until they click to secure the connection. Route the cable to avoid sharp bends and sources of strong electromagnetic interference for best performance. The 1.5 m length is suited to devices positioned close to each other.

Recommendations

For optimal performance, use this Cat6 S/FTP cable for Gigabit Ethernet or other high-speed network links and avoid running it in parallel with high-voltage power lines. Inspect connectors for damage before use and replace the cable if the jacket or connector is compromised.