Καλώδιο δικτύου Lanberg PCU6-10CC-0050-S RJ-45 Cat6 0,5 m Γκρι

Lanberg PCU6-10CC-0050-S is a Cat6 U/UTP patch cord with RJ-45 connectors at both ends and a length of 0.5 m. The grey (RAL7035) cable is designed for data transmission up to 250 MHz and is compatible with ANSI/TIA/EIA-568B standards. The cable core uses 26 AWG conductors with 7 strands of 0.16 mm, HDPE conductor insulation of 0.80 mm and an outer PVC jacket of 5.4 mm. A printed length counter appears on the cable every metre. The product is supplied in a string bag.

Advantages

The Cat6 U/UTP construction provides defined performance up to 250 MHz while minimizing electromagnetic interference in typical LAN environments. Compact 0.5 m length is suitable for short connections between devices without excess cable. Quality materials—26 AWG stranded conductors, HDPE insulation and a PVC jacket—ensure reliable signal transmission and mechanical protection. Compliance with ANSI/TIA/EIA-568B ensures compatibility with standard network equipment.

Suitable for

• Short connections between switches, routers and patch panels
• Connecting network devices on desktops or in small server cabinets
• Patch cabling in home and office Ethernet installations

Key specifications

• Category: Cat6 U/UTP (unshielded)
• Length: 0.5 m
• Connectors: RJ-45 — both ends
• Conductor: AWG 26, stranded (7 × 0.16 mm)
• Conductor insulation: HDPE, 0.80 mm
• Outer jacket: PVC, 5.4 mm
• Operating frequency: up to 250 MHz
• Standards: compatible with ANSI/TIA/EIA-568B
• Colour: Grey (RAL7035)
• Packaging: string bag

How to use

Connect the RJ-45 plugs to the corresponding Ethernet ports on your devices (switch, router, PC or patch panel). Ensure connectors are fully inserted and the cable is not sharply bent near the ends to avoid mechanical stress. Use the 0.5 m length for short, tidy connections where longer cables would create clutter.

Recommendations

For best performance, avoid running the cable parallel and close to high-voltage power lines or strong EMI sources. Use the patch cord for intra-rack or short inter-device connections and replace any cable with visible damage to the jacket or connectors.