Καλώδιο δικτύου Digitus CAT 5e SF/UTP Patch RJ-45 Cat5e 10m γκρι

The DIGITUS Network Cable CAT 5e SF/UTP Patch Cord is a 10 m grey Ethernet patch cable with RJ-45 connectors designed for reliable data transmission in home and office networks. Manufactured and tested to ISO/IEC 11801 and DIN EN 50173 Category 5e standards, this cable supports performance up to 100 MHz and complies with channel specification requirements. The transparent blue plug with metal shielding enables quick visual identification of Category 5e, and the cable is PoE ready.

Advantages

Constructed with copper conductors and SF/UTP shielding, the cable minimises interference and ensures stable signal quality for 10/100/1000Base-T(X) applications. Each end is equipped with a molded boot providing kink protection, strain relief and a latch protection to reduce the risk of connector damage. Performance is tested including near-end crosstalk (NEXT) to guarantee Category 5e characteristics up to 100 MHz.

Suitable for

• Connecting PCs, switches and routers in home and small office networks
• Ethernet installations using 10/100/1000Base-T(X)
• Power over Ethernet (PoE) devices

Key specifications

• Length: 10 m
• Connectors: RJ-45 to RJ-45
• Cabling standard: Category 5e (Class D), ISO/IEC 11801, DIN EN 50173
• Shielding: SF/UTP (foil screened with unshielded pairs)
• Conductor: Copper (Cu)
• Rated frequency: up to 100 MHz
• Colour: Grey (transparent blue connector)
• MPN: DK-1531-100
• EAN: 4016032213123

How to use

Plug each RJ-45 connector into the corresponding Ethernet port of your devices (for example switch, router or PC). Ensure connectors click into place and that the molded boots are not kinked or under strain. For optimal performance, avoid running the cable parallel to power lines or sources of electromagnetic interference. The cable supports PoE; verify device compatibility and power requirements before use.

Recommendations

For reliable long-term performance, route the cable away from strong EMI sources, avoid tight bends and secure with cable ties that do not compress the jacket. Confirm connector seating and test the link speed after installation to ensure the expected 10/100/1000Base-T(X) operation.