Ασύρματο Access Point Grandstream GWN7615 2,4 GHz 5 GHz

The Grandstream GWN7615 is a dual-band wireless access point supporting 2.4 GHz and 5 GHz operation with dual Gigabit Ethernet ports and PoE/PoE+ for flexible installation. Designed for deployments ranging from small retail sites to office buildings and hotels, the GWN7615 supports advanced QoS, low-latency real-time applications, mesh networking, captive portals and can handle 200+ concurrent clients per AP. Management is controller-less via the embedded web UI and the device is also supported by GWN.Cloud and GWN Manager for cloud or on-premise Wi‑Fi management. This access point is suitable for voice-over-Wi‑Fi deployments and integrates with Grandstream Wi‑Fi-capable IP phones.

Advantages

The GWN7615 offers dual-band performance with IEEE 802.11a/b/g/n/ac support, dual Gigabit Ethernet ports with PoE/PoE+ power options, and capacity for 200+ simultaneous clients, enabling scalable wireless coverage. Its controller-less distributed management simplifies installation and local troubleshooting via the embedded web interface, while compatibility with GWN.Cloud and GWN Manager provides centralized cloud or on-premise management. Built-in features such as advanced QoS, low-latency handling for real-time traffic, mesh support and captive portal capabilities make it suitable for varied deployment scenarios.

Suitable for

• Office buildings and multi‑floor workplaces
• Retail stores and point-of-sale environments
• Hotels, guest Wi‑Fi and hospitality environments
• Voice-over-Wi‑Fi with Grandstream IP phones
• Public hotspots and guest networks with captive portals

Key specifications

• Wireless bands: 2.4 GHz and 5 GHz (dual-band)
• Standards: IEEE 802.11a/b/g/n/ac
• Ethernet LAN: 2 × RJ-45 Gigabit ports (10/100/1000 Mbps)
• Power: PoE/PoE+ support; maximum power consumption 12.5 W
• Concurrent clients: 200+ clients per AP
• Security: WEP, WPA, WPA2, WPA2-PSK
• Weight: 0.5 kg
• Color: White

How to use

Mount the GWN7615 in the desired location and connect it to your network using a Gigabit Ethernet cable. If available, use a PoE/PoE+ switch or injector to power the device over Ethernet. Access the embedded web user interface to perform initial configuration, set SSIDs, security modes and QoS policies, or register the AP with GWN.Cloud or GWN Manager for centralized management. For voice deployments, configure VLANs and prioritization for voice traffic and pair the AP with Grandstream Wi‑Fi phones as required.

Recommendations

For optimal performance, place access points to provide overlapping coverage without excessive co‑channel interference, enable QoS for real‑time traffic, and use GWN.Cloud or GWN Manager to monitor load and adjust settings. Use PoE/PoE+ capable network equipment to simplify installation and ensure sufficient power for peak operation.