ACT Λευκό 3 μέτρα LSZH SFTP CAT6A Patch καλώδιο χωρίς γλωττίδα με βύσματα RJ45

The ACT White 3 meter LSZH SFTP CAT6A patch cable combines a 3 m cable length with S/FTP shielding and LSZH outer jacket to support high-speed data transmission while reducing electromagnetic interference and improving safety in low-ventilation environments. It has snagless RJ45 connectors with gold-plated contacts and a white jacket, making it suitable for reliable network connections in home, office, or transport settings where fire-safety and signal integrity matter.

Advantages

LSZH jacket material minimizes toxic smoke and halogen emissions in case of fire, S/FTP shielding reduces crosstalk and external interference, and gold-plated RJ45 contacts ensure stable connectivity and corrosion resistance. The snagless connector design protects the clip during installation and the 3 m length provides flexibility for typical patching and desk-to-wall connections.

Suitable for

• Connecting computers, switches, and routers in home and office networks
• Patch panels and structured cabling installations
• Environments with limited ventilation such as vehicles and enclosed equipment rooms

Key specifications

• Product: Patch Cable ACT White 3 meter LSZH SFTP CAT6A
• Length: 3 m
• Shielding: S/FTP (shielded foiled twisted pair)
• Jacket: LSZH (Low Smoke Zero Halogen)
• Connectors: RJ-45 to RJ-45, snagless, gold-plated contacts
• Color: White
• Brand: ACT
• MPN: FB7303
• EAN: 8716065314564

How to use

Plug one RJ45 connector into the network device (switch, router or network interface) and the other into the corresponding port on the target device or patch panel. Ensure connectors are fully inserted until the latch clicks. Route the cable to avoid tight bends and sharp edges; leave some slack to prevent strain on the connectors. For best performance, keep the cable separate from power lines and large sources of electromagnetic interference.

Recommendations

Use the ACT CAT6A S/FTP LSZH cable for connections where both signal integrity and reduced smoke/halogen emissions are important. Do not exceed recommended bend radius specified by industry standards for Cat6A cables, and replace the cable if the jacket or connectors are visibly damaged.