ACT Καφέ καλώδιο patch U/UTP CAT6 10 μέτρων χωρίς γλωττίδα με βύσματα RJ45

The ACT Brown 10 meter U/UTP CAT6 patch cable with RJ45 connectors is a Category 6 unshielded twisted pair cable designed for reliable high-speed Ethernet connections. It features full copper conductors and gold-plated RJ45 plugs with a snagless design to protect the connector latch during installation. The cable meets ANSI/TIA568-C2-1 performance requirements and complies with CPR Euroclass Eca.

Advantages

Full copper conductors ensure consistent signal quality and are suitable for Power over Ethernet (PoE) use. The snagless RJ45 design reduces the risk of latch damage when routing or pulling the cable. Gold-plated contacts improve contact reliability and help reduce corrosion. Compliance with ANSI/TIA568-C2-1 and CPR Euroclass Eca confirms the cable meets recognized electrical and fire-safety standards.

Suitable for

• Ethernet networks requiring Cat6 performance
• PoE devices such as IP phones, cameras and wireless access points
• Home and office patching, horizontal cabling and equipment interconnects

Key specifications

• Length: 10 m
• Cable type: U/UTP (unshielded)
• Category: CAT6
• Conductors: full copper
• Connectors: RJ-45 to RJ-45, gold-plated, snagless
• Colour: Brown
• Standards: ANSI/TIA568-C2-1; CPR Euroclass Eca

How to use

Connect one RJ45 plug to a network device (switch, router or patch panel) and the other to a computer, IP camera, access point or other Ethernet-enabled device. Route the cable without sharp bends and avoid tight kinks to maintain signal integrity. The snagless design protects the connector clip when pulling the cable through conduits or cable channels.

Recommendations

For reliable PoE operation and long-term performance, use this ACT CAT6 patch cable with compatible network equipment and avoid exposure to excessive heat or mechanical stress. Replace the cable if the jacket or connectors show visible damage.