Zebra CBL-DC-393A1-02 καλώδιο τροφοδοσίας μαύρο, κόκκινο 1 m

The Zebra CBL-DC-393A1-02 is a 1 m DC "Y" line power cable designed to feed two cradles from a single power supply. The cable has black and red conductors for clear polarity identification and is intended for use with compatible Zebra charging cradles. When cradles are interconnected, the cable can support charging of up to 12 devices in total, with each leg capable of powering up to 6 devices depending on the charging mode and cradle configuration.

Advantages

This DC "Y" cable simplifies installation by allowing two cradles to share one power source, reducing the number of power supplies required. Its 1 m length provides reasonable reach for typical counter or rack mounting, and the black/red color coding helps ensure correct connections. The design supports interconnected cradles so multiple devices can be charged from a single outlet when compatible charging modes are used.

Suitable for

• Connecting two Zebra cradles to one power supply
• Charging multiple handheld terminals or scanners in retail and warehouse environments
• Desk- or counter-mounted charging setups where space or outlet availability is limited
• Environments requiring clear polarity identification during installation

Key specifications

• Manufacturer: Zebra
• Model / MPN: CBL-DC-393A1-02
• Cable type: DC "Y" line power cable
• Cable length: 1 m (39.7 inches)
• Product colour: Black, Red
• Use case: Powers two cradles from a single power supply; supports up to 12 devices when cradles are interconnected (up to 6 devices per leg depending on charging mode)

How to use

Connect the single input end of the DC "Y" cable to the compatible power supply output, then attach each of the two output legs to the DC input of the respective Zebra cradles. If cradles are linked to each other, follow the cradle manufacturer instructions for interconnection and device placement to achieve the intended combined charging capacity. Verify correct polarity using the black and red colour coding before powering on.

Recommendations

Use the cable only with compatible Zebra cradles and a power supply that meets the voltage and current requirements specified by the cradle manufacturer. Avoid routing the cable near heat sources or sharp edges and inspect connections regularly for wear or damage.