Υλικό 3D εκτύπωσης ABS Gembird 3DP-ABS1.75-01-Y

Gembird 3DP-ABS1.75-01-Y is a yellow ABS filament for 3D printing with a 1.75 mm diameter supplied in a 1 kg roll. Designed for use with a wide range of 3D printers, this printing material provides good toughness and high strength while remaining relatively low in density, which helps keep larger printed parts lighter. The spool dimensions are 210 mm × 210 mm for convenient storage.

Advantages

This ABS filament combines high strength and good toughness, making it suitable for durable parts and functional prototypes. Its lower density reduces the weight of larger volume prints. The material is compatible with a variety of 3D printer brands and is supplied in a consumer-friendly 1 kg package.

Suitable for

• Functional prototypes and mechanical parts
• Decorative models and larger volumetric prints
• Parts requiring higher strength and impact resistance

Key specifications

• Material: ABS
• Diameter: 1.75 mm
• Weight: 1 kg
• Color: Yellow
• Brand: Gembird (model 3DP-ABS1.75-01-Y)
• Package dimensions: 210 mm × 210 mm
• Compatibility: Any brand of 3D printer

How to use

Install the 1.75 mm filament onto the spool holder of your 3D printer and feed it through the extruder according to your printer manufacturer's instructions. Recommended printing settings vary by machine; typical ABS settings are an extruder temperature around 230–250°C and a heated bed at 90–110°C. Use suitable bed adhesion methods and enclosure or ventilation as needed to reduce warping and fumes. Calibrate feed rate and retraction settings to match your printer and model geometry.

Recommendations

Store the filament in a dry place and keep it sealed when not in use to avoid moisture absorption. For best results with larger prints, consider using a heated enclosure and gradual cooling to minimize warping. Follow your printer's safety guidelines for handling ABS and for ventilation when printing.