Υλικό 3D εκτύπωσης Gembird 3DP-PLA+1.75-02-R κόκκινο 1 kg

Gembird 3DP-PLA+1.75-02-R Red 1 kg is a Polylactic Acid (PLA) filament designed for desktop FDM 3D printers. Supplied as 1 kg of 1.75 mm diameter filament in a vivid red color, this PLA+ material is RoHS certified and intended for general-purpose printing. The filament's listed density of 0.00125 kg/m³ indicates a lightweight material suitable for a wide range of models, prototypes and functional parts compatible with any-brand 1.75 mm extruder systems.

Advantages

The filament offers consistent diameter and flow for reliable layer adhesion and repeatable results across short and long prints. Its RoHS certification confirms compliance with environmental safety standards. Being a PLA-based material, it combines ease of printing with minimal warping and limited odor during extrusion, making it suitable for home, educational and workshop environments.

Suitable for

Key specifications

How to use

Load the 1.75 mm filament into the printer according to the printer manufacturer's instructions. Recommended print temperature and speed depend on your specific printer and hotend; start with typical PLA settings and adjust as needed for layer adhesion and surface finish. Ensure the print bed is prepared—use a heated bed if available or a suitable adhesive or surface for first-layer adhesion. Monitor the first layers to confirm proper extrusion and bed adhesion, then continue with the chosen print job.

Recommendations

Store the filament in a dry place and keep it sealed when not in use to prevent moisture absorption. For improved mechanical properties and surface finish, calibrate extrusion multiplier and retraction settings for your printer. Use standard PLA print temperatures and moderate cooling; avoid high bed temperatures that exceed recommended PLA ranges.