Λογαριασμός Επικοινωνία
Το καλάθι σας
Αποστολή με DPD & FedEx
Βοήθεια; Ρωτήστε το AI

Σύστημα διαχείρισης μπαταρίας VICTRON ENERGY VE.Bus BMS V2 (BMS300200200)

Σύστημα διαχείρισης μπαταρίας VICTRON ENERGY VE.Bus BMS V2 (BMS300200200)
Σύστημα διαχείρισης μπαταρίας VICTRON ENERGY VE.Bus BMS V2 (BMS300200200)
150,24 €
PDF
PDF

Αποστολή & επιστροφές

Εκτιμώμενη παράδοση Δευτέρα, 30 Νοεμβρίου
Θα ενημερώνεστε μέσω του αναλυτικού μας συστήματος παρακολούθησης
Τρόποι πληρωμής
Τραπεζική κάρταVisaMastercardPayPalApple PayGoogle PayΤραπεζική κατάθεση

Κάντε μια ερώτηση – ο βοηθός AI απαντά αμέσως.

Περιγραφή

The VE.Bus BMS V2 is the next generation of VE.Bus battery management systems (BMS) from Victron Energy, designed to connect and protect up to 20 (12.8V or 25.6V) Lithium Battery Smart batteries (LiFePO4 or LFP).

  • Pre-alarm signal to warn of cell undervoltage.
  • Protection against overvoltage and undervoltage of each cell.
  • Protection against overtemperature and undertemperature.

The Victron Energy VE.Bus BMS V2 (MPN: BMS300200200) is the next generation of the VE.Bus BMS for Victron Lithium Smart batteries (LFP-Smart) 12.8V and 25.6V. Each individual cell of a LiFePO4 battery must be protected against overvoltage, undervoltage and overtemperature. This is exactly the task of the VE.Bus BMS V2. The product is suitable for protecting 12V, 24V and 48V battery banks and operates in an operating voltage range of 9 – 70 VDC.

  • VE.Bus BMS V2 in combination with Victron LiFePO4 batteries.

Victron LiFePO4 batteries have built-in cell balancing, temperature and voltage control (abbreviation: BTV). They are connected to the VE.Bus BMS V2 via two M8 circular connector cable sets. The BTVs of multiple batteries can be daisy-chained. They can be connected in series, parallel and both series and parallel, allowing a battery bank of 12V, 24V or 48V to be designed. Up to 20 batteries in a system are possible, resulting in an energy storage of max. 84kWh for a 12V system and 102kWh in a 24V and 48V system. For further details, please refer to the technical documentation for our LiFePO4 battery.

  • Core tasks of the Victron VE.Bus BMS V2.

Specifically designed for use with Victron Lithium Battery Smart 12.8V & 25.6V batteries.

Communicates directly with the lithium battery via the battery's M8 circular connector cables.

Disconnects VE.Bus inverter or inverter/chargers via VE.Bus and other loads via the "Load disconnect" terminal in case of cell undervoltage.

  • Difference from the VE.Bus BMS.

The VE.Bus BMS V2 was specifically designed for use in systems with GX devices and is therefore perfect for ESS or backup applications with a battery capacity of up to 84kWh (12V) or 102kWh (24V/48V).

In addition, the BMS V2 has a remote contact for remote control (ON/OFF).

  • Communication with VE.Bus products.

MultiPlus, Quattro or Phoenix inverters are connected to the "MultiPlus/Quattro" port with a standard RJ45 UTP cable.

The BMS disables inverting in case of cell undervoltage and charging in case of cell overvoltage or overtemperature.

  • Communication with remote control devices.

A GX device (e.g. Cerbo GX), a Digital Multi Control (DMC) panel or a VE.Bus Smart Dongle (including any combination) can be connected to the BMS via the "Remote panel" port. This accessory can be used in combination with the BMS to remotely control the switching state of the VE.Bus inverter or inverter/charger (On / Off / Charger only).

  • Terminals for additional inputs and outputs.

The BMS has a dedicated power output (GX-Power) for a GX device and an additional power input (Aux-In) for an external DC source, e.g. a mains adapter. In case of a system shutdown, the GX device is powered via the auxiliary voltage input or disconnected from the mains to prevent further discharge of the battery.

  • Technical data.
  • 1x User manual

Χαρακτηριστικά

Χαρακτηριστικά
EAN
8719076057277
MPN
BMS300200200
Αριθμός θυρών
2
Αριθμός προϊόντων στη συσκευασία
1
Εύρος θερμοκρασίας λειτουργίας
-20°C - +50°C
Κατηγορία
Αξεσουάρ ηλιακών μπαταριών
Κωδικός διεθνούς προστασίας (IP)
IP20
Μάρκα
VICTRON ENERGY
Μέγεθος
105.5 x 94.5 x 23.8 mm
Μοντέλο
BMS300200200
Περιλαμβάνονται αξεσουάρ
Operating manual
Τύπος προϊόντος
Battery Management System (BMS)
Τύπος υποδοχής
RJ45
Υγρασία αέρα
max. 95% (non-condensing)
Ιστορικό τιμών τους τελευταίους 6 μήνες
Σύστημα διαχείρισης μπαταρίας VICTRON ENERGY VE.Bus BMS V2 (BMS300200200)
Τρέχουσα
150,24 €
Χαμηλότερη 7 ημ.
150,24 €
Υψηλότερη 7 ημ.
150,24 €
Μεταβολή 24 ωρών
0,00 €   0%
Μεταβολή 7 ημ.
—   
Μεταβολή 30 ημ.
—   

Γράψτε μια αξιολόγηση

Βαθμολογία *
Το όνομά σας θα εμφανίζεται δημόσια – μπορείτε να χρησιμοποιήσετε ψευδώνυμο. Προσκαλούμε τους αγοραστές να γράφουν αξιολογήσεις. Τις ελέγχουμε πριν από τη δημοσίευση και δημοσιεύουμε επίσης τις αρνητικές.

Περισσότερα προϊόντα VICTRON ENERGY σε αυτή την κατηγορία

10

Δημοφιλή προϊόντα σε αυτή την κατηγορία

4
Πωλητής: UAB KUR LT · Gariūnų g. 57-14, LT-02300 Βίλνιους, Λιθουανία · Κωδικός εταιρείας 303192950 · ΑΦΜ/ΦΠΑ ΕΕ LT100008198612 · Αποστολή από την ΕΕ (Λιθουανία)
WhatsApp
Messenger
Γεια σας, είμαι ο βοηθός AI του DistriNode. Μπορώ να σας βοηθήσω να βρείτε προϊόντα, να συγκρίνετε επιλογές, να δημιουργήσετε PDF προσφορών ή να ανοίξετε αιτήματα υποστήριξης.
Όλες οι κατηγορίες