Τρυπάνι σφυρί Bosch Expert SDS Clean plus-8X 16 mm 400 mm

Bosch Expert SDS Clean plus-8X 16mm 400mm is a hammer drill bit designed for use with SDS-compatible rotary hammer drills. With a 16 mm diameter and 400 mm working length, this drill bit is intended for drilling through concrete and masonry where deep, accurate holes are required. The Clean plus-8X design supports improved dust evacuation during drilling, contributing to steady penetration and reduced clogging in demanding construction and renovation tasks.

Advantages

The drill bit combines a long working length with a robust carbide tip that maintains drilling accuracy in reinforced concrete and hard masonry. Its flute geometry facilitates efficient removal of dust and debris from the hole, which helps sustain drill performance and reduces the frequency of bit clearing. The SDS-compatible shank ensures secure mounting and quick changes in rotary hammer tools. Materials and design focus on consistent drilling progress and reliable centring when starting holes.

Suitable for

• Drilling deep holes in concrete and solid masonry
• Installation of anchors and dowels in structural work
• Renovation tasks requiring long-reach drilling
• Professional trade use on construction sites and building projects

Key specifications

• Diameter: 16 mm
• Overall length: 400 mm
• Compatibility: SDS-compatible rotary hammer drills
• Tip material: carbide tip for concrete and masonry
• Flute design: engineered for improved dust extraction
• Primary applications: concrete and masonry drilling

How to use

Select a rotary hammer drill with SDS compatibility, insert the Bosch Expert SDS Clean plus-8X 16mm 400mm bit into the tool’s chuck until it locks, and secure the tool according to the drill manufacturer’s instructions. Use hammer drilling mode for concrete and masonry, apply steady pressure without forcing the bit, and allow the drill’s hammering action to remove material. Periodically withdraw the bit to clear accumulated dust if drilling deep holes, and check bit condition for wear or damage before continued use.

Recommendations

Use appropriate personal protective equipment including eye protection, hearing protection and a dust mask or extraction system. For reinforced concrete, start with a pilot hole if necessary and monitor drilling speed to avoid overheating. Replace the bit when the carbide tip becomes dull or when drilling performance declines.