Τρυπάνι Bosch SDS-plus-5 Μήκος 265 mm 2608585621

The Bosch SDS-plus-5 drill bit, 265 mm length, is engineered for rotary hammer drilling in concrete and masonry. Designed for use with SDS-plus chucks, this drill bit provides consistent drilling performance for through-holes and anchor preparation. The 265 mm working length offers reach for medium-depth installations while the carbide tip and reinforced flute profile deliver durable cutting and efficient debris extraction.

Advantages

This Bosch drill bit combines a hardened carbide tip with a robust shaft geometry to maintain drilling accuracy and prolong service life under frequent use. The flute design helps remove dust and rubble quickly, reducing friction and heat buildup during continuous operation. Compatibility with SDS-plus systems ensures secure bit retention and rapid bit changes, supporting steady productivity on job sites.

Suitable for

• Drilling holes in concrete for anchors and dowels
• Creating passageways through masonry and blockwork
• Preparation of fixing points for mechanical and electrical installations
• Use with SDS-plus rotary hammers for medium-depth drilling tasks

Key specifications

• Length: 265 mm
• Shank type: SDS-plus compatible
• Material tip: carbide
• Intended materials: concrete, masonry, block
• Application: rotary hammer drilling for medium-depth holes

How to use

Fit the drill bit into an SDS-plus compatible rotary hammer and ensure it is securely locked. Mark the drilling point and set the rotary hammer to rotary or hammer-drill mode appropriate for concrete or masonry. Apply steady axial pressure while allowing the tool to do the work; avoid excessive force that may damage the bit or the drill. Periodically withdraw the bit to clear dust and prevent clogging of the flute, and allow the bit to cool during prolonged drilling sequences.

Recommendations

For best results, use with a rotary hammer rated for SDS-plus bits and select the correct drill mode for the material. Wear appropriate personal protective equipment including eye protection, dust mask and hearing protection. When drilling deep or large-diameter holes, withdraw the bit regularly to clear debris and reduce heat. Inspect the carbide tip for wear and replace the bit when cutting performance decreases.