Σετ βιδών ανεμιστήρα InLine InLine 33371B

InLine Fan Screws Set InLine 33371B contains screws designed to fasten small cooling fans up to 15 mm depth and with a nominal diameter of 1.5 cm. Manufactured in a silver finish, the set is intended to provide a secure mechanical connection for standard fan housings and mounts, compatible with common 15 mm fan models.

Advantages

The screws are made from a durable metal with a silver surface treatment to resist wear and ensure stable fastening. Their dimensions match typical mounting holes for 15 mm depth fans, allowing straightforward installation and consistent alignment of the fan during use.

Suitable for

• Mounting 15 mm depth cooling fans with 1.5 cm diameter shaft/hub
• Small electronics enclosures and compact cooling systems
• Replacing worn or missing fan fasteners in PCs, routers, or power supplies

Key specifications

• Brand: InLine
• Model / MPN: 33371B
• EAN: 4043718082339
• Intended fan depth: up to 15 mm
• Nominal diameter reference: 1.5 cm
• Finish: silver metal

How to use

Align the fan mounting holes with the corresponding holes in the chassis or bracket, insert the screw through the fan and into the threaded or nut-receiving mount, then tighten until the fan is held securely without deforming the frame. Use an appropriate screwdriver bit to avoid stripping the head; tighten progressively on each screw to ensure even seating.

Recommendations

Check compatibility with your fan and chassis before installation. Do not overtighten screws to prevent cracking plastic fan frames; if the mounting uses nuts, hold the nut steady while tightening. Store spare screws in a dry place to avoid corrosion.