Μονάδα ελέγχου BMS Pylontech Force-H2 FC0500M-40S-V2 HV

The Force-H2 control unit from Pylontech is a very high-quality battery management system that serves to protect the battery storage for safe and trouble-free operation.

• Deep discharge
• Overvoltage
• Overload

It is irrelevant how many storage modules are in use at the same time. It is important that one BMS is always used per tower. A tower consists of at least 2 to a maximum of 4 Force-H2 3.55 kWh battery modules, which can result in a storage capacity of 7.1-14.2 kWh.

The long-proven Pylontech communication protocol is directly supported by a large number of inverters.

• Deep discharge and overcharge
• Overvoltage during charging
• Excessive currents during charging and discharging
• Over- and under-temperature
• Short circuit and reverse polarity
• Higher compatibility than other BMS systems
• Intuitive control panel with LED displays

With the control panel on the control unit, the current status of the battery tower can be checked at any time. In addition, the communication speed (baud rate) can be set directly on the unit.