Σύστημα διαχείρισης μπαταρίας (BMS) Pylontech για Force-H3 FH10050 / FC1000

The Pylontech Force-H3 control unit is the central battery management system for the Force-H3 high-voltage batteries, which reliably protects each battery module from unfavorable operating conditions.

Regardless of the number of storage modules used, only one BMS is required per tower. A tower consists of at least 2 to a maximum of 6 Force-H3 5.12 kWh battery modules, which enables a storage capacity of 10.24 to 35.8 kWh. In addition, the new H3 series can now operate up to 6 towers in parallel in one system.

• Deep discharge and overcharge
• Overvoltage during charging
• Excessive currents during charging and discharging
• Over- and under-temperature
• Short circuit and reverse polarity
• Compatibility

The long-proven Pylontech communication protocol is directly supported by a large number of inverters.

• Intuitive control panel with LED displays

With the control panel on the control unit, the current status of the battery tower can be checked at any time. In addition, the communication speed (baud rate) can be set directly on the unit.

• Group management

With the Pylontech Force-H3, several groups of battery modules can be connected in parallel to further increase the storage capacity. Up to 6 groups can be operated in parallel, whereby a maximum total capacity of 215.04 kWh can be achieved. Each group can be configured independently, which enables high flexibility when scaling the storage system. Despite the parallel grouping, the system is easy to control thanks to the central battery management, so that all modules work efficiently and safely.

In the box

• 1x Pylontech Force-H3 BMS
• Tower base (540 x 350 x 40 mm)
• 2x RJ45 communication cables
• 2x 3 m power cables
• 1x 1 m grounding cable
• Mounting accessories
• 1x product manual