Προσαρμογέας PoE ALLNET ALL048600

The ALLNET ALL048600 PoE adapter is designed to deliver power and data over Ethernet for networked devices that support Power over Ethernet. It supports Fast and Gigabit Ethernet links with data rates of 10/100/1000 Mbit/s and complies with relevant IEEE networking standards. The adapter provides up to 57 V PoE and supports a maximum power budget of 120 W while remaining compact and lightweight at 200 x 80 x 30 mm and 253 g, making it suitable for installations where space and weight are limited.

Advantages

The adapter combines data transmission and power delivery on a single cable, reducing the need for separate power supplies and simplifying installation. Its support for Gigabit Ethernet ensures full-speed connectivity for bandwidth-sensitive applications, while the high PoE voltage and substantial power budget enable powering of multiple or higher-consumption devices. The compact form factor and low weight facilitate deployment in constrained spaces and ease handling during installation.

Suitable for

• Powering network cameras and IP surveillance devices
• Supplying access points and wireless devices in ceilings or outdoor enclosures
• Feeding VoIP phones and small network appliances
• Providing power for PoE-enabled sensors and controllers

Key specifications

• Ethernet data rates: 10/100/1000 Mbit/s (Fast and Gigabit Ethernet)
• PoE output voltage: 57 V
• Maximum power budget: 120 W
• Standards compliance: IEEE PoE networking standards
• Dimensions: 200 x 80 x 30 mm
• Weight: 253 g

How to use

Connect the ALLNET PoE adapter inline between a network switch or router and the PoE-capable device using standard Ethernet cables. Ensure the network equipment supports the required data rates and that the connected device accepts PoE at the provided voltage. Verify power budgeting to confirm the adapter can supply sufficient power for the attached device or devices. Follow any site-specific grounding or mounting requirements and route cables to avoid excessive bending or strain.

Recommendations

Use shielded Ethernet cabling where required by the installation environment and follow IEEE guidelines for PoE deployments. Confirm device compatibility with 57 V PoE and ensure the total power draw does not exceed the adapter's 120 W budget. Install the adapter in a ventilated location and protect it from moisture and extreme temperatures to maintain reliable operation.