Polymaker Panchroma Gradient Matte PLA Νήμα 1,75 mm, 1 kg, χρώμα Gradient Matte Spring (CA04056)

Makers who want eye-catching prints without post-processing will appreciate this gradient matte PLA. Load it into any FDM printer, set a standard PLA profile, and watch the colour shift smoothly from one tone to the next as the model grows. The matte surface hides layer lines and gives a premium, non-glossy look straight off the bed.

Key specifications

• Material: PLA (Polylactic Acid)
• Colour: Panchroma Gradient (multicolour transitioning)
• Finish: Matte
• Filament diameter: 1.75 mm
• Diameter tolerance: ±0.02 mm
• Net filament weight: 1 kg
• Spool material: Cardboard
• Recommended nozzle temperature: 190–230 °C
• Recommended bed temperature: 25–60 °C (or off)
• Recommended print speed: 30–70 mm/s
• Density: 1.24 g/cm³
• Tensile strength: 50 MPa
• Elongation at break: 5%
• Heat deflection temperature (0.45 MPa): 55 °C
• Spool hole diameter: 55 mm

Why choose it

The gradient colour change is built into the filament, so you get a smooth transition without swapping materials. Matte PLA is forgiving to print, resists warping, and delivers consistent layer adhesion. The cardboard spool is easier to recycle than plastic.

Ideal use cases

• Decorative vases, sculptures, and display pieces
• Prototypes where surface finish matters
• Educational projects demonstrating material properties
• Gifts and custom items with a unique colour flow

Good to know

The filament is vacuum-sealed with desiccant to keep it dry. Store in a sealed container when not in use to maintain print quality.