Polymaker PolyLite PLA Νήμα 3D εκτυπωτή 1,75mm Ελαιόχρωμο 1kg (PA02058)

Every 3D printing enthusiast knows the frustration of brittle filament, inconsistent diameter, and warped prints. Polymaker PolyLite PLA in Olive Green solves these issues with a reliable, easy-to-print material that delivers smooth, detailed results on any FDM printer. This 1 kg spool of 1.75 mm filament is vacuum-sealed with desiccant to ensure moisture-free performance straight out of the box.

Who is it for

PolyLite PLA is ideal for makers, hobbyists, educators, and professionals who need a dependable, general-purpose filament for prototypes, models, and functional parts. Its low warping and odorless printing make it perfect for home and office environments, while the olive green colour adds a unique, earthy tone to your creations.

Main features

• High-quality Polylactic Acid (PLA) with a consistent diameter of 1.75 mm ± 0.03 mm for reliable extrusion.
• Olive green colour offers a distinctive, matte-like finish that hides layer lines well.
• Wide printing temperature range (190–230 °C) and low bed temperature requirement (25–60 °C or off) for easy setup.
• Excellent dimensional stability and low shrinkage reduce warping and curling.
• Vacuum-sealed packaging with desiccant protects filament from moisture and dust.
• Compatible with most FDM 3D printers that accept 1.75 mm filament.

Specifications

• Material: Polylactic Acid (PLA)
• Filament diameter: 1.75 mm
• Diameter tolerance: ± 0.03 mm
• Net weight: 1 kg
• Colour: Olive Green
• Recommended nozzle temperature: 190–230 °C
• Recommended bed temperature: 25–60 °C (or off)
• Recommended print speed: 40–90 mm/s
• Density: 1.17–1.24 g/cm³
• Tensile strength: 52 MPa
• Elongation at break: 6%
• Heat deflection temperature (0.45 MPa): 55 °C
• Shore hardness: D60
• Melt flow index: 9.5 g/10 min (190 °C, 2.16 kg)
• Spool type: Standard plastic spool
• Series: PolyLite

Tips

For best results, print with a nozzle temperature around 210 °C and a bed temperature of 50 °C. If you experience stringing, lower the nozzle temperature slightly or increase retraction. Store the filament in a sealed bag with desiccant when not in use to maintain print quality. Olive green PLA can be sanded, painted, or glued with standard hobby adhesives for post-processing.