Polymaker Panchroma Glow Νήμα PLA 1,75 mm, 1 kg, Χρώμα Glow Green (CA02030)

Polymaker Panchroma PLA Glow-in-the-Dark Green stands out with its photoluminescent effect: after exposure to light, the printed object emits a soft green glow in the dark. This PLA filament combines the ease of printing of standard PLA with a unique visual feature, making it ideal for decorative items, toys, or functional parts that need to be visible in low-light conditions.

Highlights

• Glow-in-the-dark effect: charges under light and glows green in darkness
• Matte surface finish for a premium look
• Recycled cardboard spool supports environmental responsibility
• Consistent 1.75 mm diameter with ±0.03 mm tolerance

In daily use

Print with standard PLA settings: nozzle 190-230 °C, bed 25-60 °C, speed 40-100 mm/s. The filament flows smoothly and adheres well to common build surfaces. After printing, expose the object to sunlight or a bright lamp to charge the glow effect. The matte finish hides layer lines, giving your prints a clean appearance.

Full specifications

• Material: PLA (Polylactic Acid)
• Filament Diameter: 1.75 mm
• Diameter Tolerance: ±0.03 mm
• Net Filament Weight: 0.75 kg
• Colour: Glow-in-the-Dark Green
• Recommended Nozzle Temperature: 190-230 °C
• Recommended Bed Temperature: 25-60 °C
• Recommended Printing Speed: 40-100 mm/s
• Density: 1.17-1.24 g/cm³
• Tensile Strength: 30-40 MPa
• Elongation at Break: 5-10%
• Spool Material: Recycled Cardboard
• Surface Finish: Matte
• Spool Outer Diameter: 200 mm
• Spool Inner Hole Diameter: 55 mm
• Spool Width: 60 mm

Final note

For best glow performance, use thicker walls and higher infill; the glow intensity depends on the amount of material and charging time.