Πένσα πρέσας με απογυμνωτή και tester δικτύου DeLOCK 90510

The DeLOCK crimp tool with stripper and network tester is designed for professional and home network work. It supports crimping, stripping and cutting of 8P (RJ45), 6P (RJ12/11) and 4P (RJ10) plugs and cables. Three integrated blades ensure reliable cable stripping and strand cutting. The compact hand tool measures approximately 69 mm × 190 mm × 22 mm and is finished in black and green.

Advantages

The tool combines crimping, stripping and cutting functions in one instrument and includes an integrated cable tester so wiring can be verified immediately after crimping. Separate pin arrangements and LED indication for RJ45, RJ11/RJ12 and RJ10 simplify testing. Batteries are housed in the handle for convenient access.

Suitable for

• Crimping and assembling RJ45 (8P) network cables
• Crimping RJ11/RJ12 (6P) telephone and data cables
• Crimping RJ10 (4P) small telephone plugs
• Field and on-site network installation and repair
• DIY network projects and cable maintenance

Key specifications

• Supported plugs: 8P (RJ45), 6P (RJ12/11), 4P (RJ10)
• Functions: crimping, stripping, cutting, integrated cable tester
• Indicator: LED run for pinout check (separate rows for RJ45, RJ11, RJ10)
• Power: 3 × LR44 batteries (not included)
• Dimensions (approx.): 69 × 190 × 22 mm
• Weight: 0.358 kg
• Colour: Black, Green
• Brand / MPN / EAN: DELOCK / 90510 / 4043619905102

How to use

Prepare the cable by aligning and cutting to the required length. Use the integrated stripper blades to remove the outer sheath, then arrange the conductors according to the chosen connector standard. Insert the plug into the appropriate crimping slot and compress the handle to crimp the contacts. Immediately test the wiring by inserting the same plug into the built-in tester socket; select the corresponding connector type and observe the LED sequence to verify pin assignment.

Recommendations

Install three LR44 batteries into the handle compartment before using the network tester. Ensure plugs are fully inserted into the correct socket for accurate LED testing. Store the tool in a dry place and inspect blades regularly for wear; replace the tool if blades become dull to maintain proper stripping and cutting performance.