Ούπα επέκτασης Fischer 562169 120 mm νάιλον 50 τεμ.

The Fischer 562169 expansion anchor is a 120 mm nylon anchor designed for secure fixing in concrete, gypsum block and masonry. Made from a combination of rigid grey nylon and a flexible red component, this anchor provides a balance of strength and controlled expansion for reliable performance in a range of building materials. Supplied pre-fitted with a matched safety screw, the pack contains 50 anchors and is intended for non-structural applications where a reliable, universal fixing is required.

Advantages

The dual-material design adapts to various substrates, allowing universal use across different building materials. The high-quality grey nylon body provides strength while the red flexible element ensures optimal spreading and reduced stress on the substrate. A pre-mounted safety screw speeds up installation by matching screw and plug immediately. The lamella geometry expands gently within the base material to minimise risk of fracture in porous materials and to enable anchoring close to edges. A European Technical Assessment (ETA) for multiple use in non-structural applications confirms secure holding performance across building material classes.

Suitable for

• Fixing wood to concrete or masonry
• Anchoring in solid concrete and dense masonry
• Use in gypsum block and perforated masonry
• General repair and construction tasks requiring non-structural anchors

Key specifications

• Brand: FISCHER
• Model / MPN: 562169
• Material: Nylon (grey body with red component)
• Length: 120 mm
• Drill hole diameter: 10 mm
• Minimum drill hole depth: 130 mm
• Pack quantity: 50 pieces
• EAN: 4048962440300

How to use

Drill a 10 mm hole to a minimum depth of 130 mm, clean the hole of dust, insert the Fischer 562169 expansion anchor flush with the surface and tighten the pre-mounted safety screw until the anchor expands and seats firmly. For perforated masonry, ensure the lamellas engage the stone web; for solid materials the design distributes load into the substrate. Observe recommended torque values for the screw and check the fixing after installation.

Recommendations

Use the Fischer 562169 anchors for non-structural fixings. Avoid use in applications requiring structural load-bearing approvals. For edge distances, fixture spacing and specific load values, refer to the ETA documentation and manufacturer's installation instructions.