Ομοαξονικό καλώδιο Televes SK2003plus 100m μαύρο

The Televes SK2003plus coaxial cable in black is a 100 meter roll designed for signal distribution in residential and commercial installations. With a characteristic impedance of 75 Ω and a conductor depth of 10.5 mm, this cable is built to provide consistent signal transmission for television, radio and data links where a standard coaxial solution is required. The compact pack dimensions make it convenient to transport and store on site.

Advantages

This coaxial cable combines standard impedance with stable mechanical dimensions to reduce signal reflections and losses over moderate distances. The 100 m length supports continuous runs without frequent joins, and the black outer sheath provides discrete routing along walls and ceilings. The cable’s construction supports common connector types and installation practices used in broadcast and satellite-ready setups.

Suitable for

• Terrestrial and satellite TV signal distribution
• FM radio antenna connections
• CCTV analogue camera feeds
• In-building coax runs for multi-room outlets
• Temporary or permanent installations requiring 100 m cable length

Key specifications

• Length: 100 m
• Color: Black
• Impedance: 75 Ω
• Depth / overall diameter reference: 10.5 mm
• Pack quantity: 1 piece
• Package dimensions: 270 mm (width) × 140 mm (height)

How to use

Measure the required run length and uncoil the Televes SK2003plus cable carefully to avoid kinks. Prepare cable ends by stripping outer sheath and dielectric to match the connector type you intend to use, following manufacturer guidelines for conductor and shield exposure. Use appropriate F-type, Belling-Lee or other compatible connectors and secure them with proper crimping or compression tools. Route the cable avoiding sharp bends and sources of strong electromagnetic interference. Test continuity and signal quality after installation and make any necessary adjustments to grounding or connectors.

Recommendations

For optimal performance, avoid bending the cable below its minimum bend radius, keep the cable run away from high-voltage power lines, and use quality connectors and grounding practices. When long-distance distribution is required, use signal amplifiers or splitters rated for 75 Ω systems to maintain adequate levels across outlets.