Neomounts DS60-425WH2 Βάση οθόνης 17-27 inch - εξοικονόμηση χώρου

The Neomounts DS60-425WH2 NEXT Lite is a full-motion dual monitor desk arm for two screens up to 27" and up to 8 kg per screen. It offers tilt, rotate and swivel adjustments together with manual height and depth control, enabling flexible positioning and an ergonomic viewing setup. The short T‑Rex® upper arm requires minimal depth when mounted near a wall or partition, allowing screens to be positioned further from the user to support better eye distance and a more ergonomic working posture. The mount supports VESA 75x75 and 100x100 mm, includes an Easy-release VESA system for quick installation, and is supplied with both desk clamp and grommet. Internal cable management keeps cables tidy, and the NEXT Lite packaging is fully plastic-free, made entirely of cardboard and paper.

Advantages

The DS60-425WH2 provides full-motion movement with a wide tilt range (-30° to 90°), 360° rotation and 180° swivel to achieve the optimal viewing angle. Its short upper arm reduces required desk depth while increasing usable workspace. The unit supports two monitors, each up to 27" and 8 kg, is compatible with common VESA patterns (75x75 and 100x100 mm), and offers both clamp and grommet mounting options. Built-in cable routing helps maintain a clean workspace and the Easy-release VESA simplifies screen installation and removal.

Suitable for

• Dual-monitor office setups and home offices
• Multitasking workstations (programming, content creation, spreadsheets)
• Ergonomic workstations requiring screen height and depth adjustment
• Workspaces with limited desk depth or close-to-wall installations

Key specifications

• Supported screens: up to 27" (per display)
• Maximum weight capacity: 8 kg per screen
• VESA compatibility: 75 x 75 mm and 100 x 100 mm
• Movement: tilt, rotate (360°), swivel (180°), manual height and depth adjustment
• Mounting options: desk clamp and grommet included
• Product colour: White
• Product weight: 3.78 kg

How to use

Attach the arm to your desk using the supplied clamp or grommet, then mount each monitor onto the Easy-release VESA plate compatible with 75x75 or 100x100 mm hole patterns. Adjust height and depth manually to set the preferred distance from the user, then use tilt, swivel and rotation to fine-tune screen angles for optimal viewing. Route monitor cables through the internal cable management channels to keep the workspace tidy. For non-standard hole patterns, optional VESA adapter plates are available from Neomounts.

Recommendations

Install and adjust both screens while they are powered off or supported to avoid damage. Verify each monitor’s weight does not exceed the 8 kg limit and confirm VESA compatibility before mounting. Place screens at a comfortable viewing distance and angle to reduce eye strain and to maintain an ergonomic posture.