Μύτη κατσαβιδιού c.k tools T2944-20 — 20 mm Διάμετρος, 160 mm Μήκος

Screw Point bit c.k tools T2944-20 — 20 mm diameter, 160 mm length is a single screw point accessory intended for use with compatible rotary tools and impact drivers. The bit's 20 mm diameter head provides increased contact area for driving or extracting larger fasteners, studs and fittings. With an overall length of 160 mm the bit offers extended reach for tasks in construction, maintenance and service environments where access or clearance is limited.

Advantages

The bit is manufactured to provide a stable fit and reliable torque transfer during driving and extraction operations, reducing slippage on larger fasteners. Its 20 mm diameter head improves engagement with wide fastener heads and fittings, while the 160 mm length increases reach into recessed or hard-to-access locations. The design is compatible with common tool holders and impact drivers made for heavy-duty use and repeated engagements.

Suitable for

Key specifications

How to use

Select a compatible rotary tool or impact driver rated for the required torque and secure the bit in the tool's chuck or holder according to the tool manufacturer's instructions. Align the screw point with the fastener head, apply steady axial pressure and operate at an appropriate speed for the fastener material and condition. For extraction, use controlled reverse rotation while maintaining pressure to avoid further damage to the fastener. Inspect the bit for wear or damage before and after use and replace it when signs of deformation or excessive wear appear.

Recommendations

Use appropriate personal protective equipment such as safety glasses and gloves. Match the bit to the fastener size and condition to reduce slippage and wear. Avoid exceeding the recommended torque of the driver or the bit; when working with rusted or damaged fasteners, consider penetrating lubricant or heat as per safe working practices.