Μονάδα πομποδέκτη SFP+ BlueOptics TN-10GSFP-LR1M-BO 10000 Mbit/s 1310 nm

The BlueOptics TN-10GSFP-LR1M-BO is an SFP+ transceiver module designed for 10G optical links over single-mode fiber. It supports a maximum data transfer rate of 10000 Mbit/s and operates at a wavelength of 1310 nm. The module is built in a metal housing, uses an SFP+ form factor with an LC duplex connection and requires a 3.3 V input voltage. Compact and lightweight, it is intended for integration in network switches, routers, storage systems and other hardware that accept SFP+ optics.

Advantages

The transceiver provides 10GBASE-LR performance with simultaneous transmit and receive channels on separate fibers via LC duplex. Its metal construction and standardized SFP+ connector ensure mechanical stability and broad compatibility with equipment that supports MSA-compliant SFP+ modules. Small size and 2 g weight reduce port-loading concerns in dense installations, while the 1310 nm wavelength is suitable for longer single-mode links. The module supports industry-standard digital diagnostics (DDM/DOM) when the host hardware exposes these functions.

Suitable for

Key specifications

How to use

Install the module into an SFP+ port of a compatible device following the device manufacturer’s hot‑plug procedure. Connect LC duplex single‑mode fiber patch cords with correct polarity to the transceiver and the remote transceiver. Ensure the host device supports 10GBASE-LR optics and, if required, enable or verify link settings in the device management interface. Observe electrostatic discharge precautions when handling the transceiver and keep protective dust caps on the optical interfaces until ready to connect.

Recommendations

Use single‑mode fiber with appropriate attenuation budget for links up to the supported range and verify DDM/DOM readings from the host device to monitor supply voltage, laser bias, transmit power, receive power and temperature. Replace protective caps when idle and follow the transceiver and equipment vendor guidelines for cleaning and installation to maintain reliable optical performance.