Μονάδα πομποδέκτη SFP BlueOptics SFPGLX20B15D-BO 1250 Mbit/s

The BlueOptics SFPGLX20B15D-BO is an SFP fiber optic transceiver module designed for single-mode links with a maximum data transfer rate of 1250 Mbit/s. Housed in a silver casing and weighing 20 g, the module follows standard SFP form-factor and provides LC Simplex connectivity for point-to-point optical transmission. It is suitable for integration into networking equipment that supports MSA-compliant SFP transceivers.

Advantages

The module supports data transmission at up to 1250 Mbit/s over single-mode fiber and uses a compact SFP interface that is widely supported by switches, routers and other optical networking devices. Silver metal housing provides a standardized mechanical fit and the small 20 g weight keeps rack and port density considerations minimal. The design is compatible with MSA SFP standards to ensure interoperability in mixed-vendor environments.

Suitable for

• Single-mode fiber point-to-point links
• Upgrading or expanding SFP-equipped switches and routers
• Fiber connections between network devices in enterprise and carrier access networks

Key specifications

• Interface type: SFP (Small Form-factor Pluggable)
• Maximum data transfer rate: 1250 Mbit/s
• Connector type: LC Simplex (optical)
• Fiber type: Single-mode fiber (SMF)
• Transmitter/receiver wavelength arrangement: typical BX-D style pairing (separate transmit and receive wavelengths for single-fiber operation)
• Housing colour: Silver metal casing
• Weight: 0.02 kg

How to use

Insert the SFP module into a compatible SFP port on a switch, router or other networking device while the device is powered according to the vendor's installation instructions. Connect a single-mode LC patch cable (LC simplex) between paired transceivers or to a compatible patch panel. Verify link status on the host device and ensure both ends use matching optical profiles and wavelengths for single-fiber BX operation. Confirm that the hosting hardware supports the required SFP form factor and data rate.

Recommendations

Ensure fiber cleanliness and correct polarity before making connections to avoid signal loss. Confirm digital diagnostics (DDM/DOM) support in the host device if real-time monitoring of optical parameters is required. Use manufacturer-recommended single-mode patch cords and follow ESD precautions when handling the module.