Μονάδα πομποδέκτη SFP BlueOptics SFP-532-BO 10000 Mbit/s SFP+ 850 nm

The BlueOptics SFP-532-BO is a 10G SFP+ fiber optic transceiver module designed for high-speed short‑range data transmission over multimode fiber. Operating at 850 nm wavelength with LC duplex connector compatibility, the module supports data rates up to 10000 Mbit/s and is housed in a compact metal enclosure. It uses a 3.3 V supply, weighs approximately 3 g and is intended for integration into network switches, routers, storage systems and other compatible hardware that accepts SFP+ 10GBASE-SR optics.

Advantages

The module follows MSA standards for SFP+ transceivers and is compatible with hardware platforms that support 10GBASE-SR optics. It provides bidirectional optical transmission with separate transmitter and receiver at 850 nm, low weight and a durable metal housing for improved mechanical reliability. Components are selected to meet industry quality expectations, and the transceiver includes support for digital diagnostics monitoring where the host hardware enables it, simplifying remote monitoring of supply voltage, laser bias, transmit output and receive input power and temperature.

Suitable for

Key specifications

How to use

Insert the SFP-532-BO transceiver into a compatible SFP+ slot of your network device while the device is powered down or in accordance with the manufacturer's hot‑swap instructions. Connect LC duplex multimode fiber patch cords to the transceiver's LC ports, ensuring correct transmit/receive alignment. Configure the host device for 10GBASE‑SR operation if required and verify link status and diagnostics via the device management interface. If the host supports digital diagnostics monitoring (DDM/DOM), use the management tools to read supply voltage, laser bias, optical output/input power and temperature for troubleshooting and verification.

Recommendations

Use OM3/OM4 multimode fiber for optimal reach and performance up to the specified distance for 10GBASE‑SR, avoid sharp bends in fiber patch cords, and ensure LC connectors are clean before installation. Confirm firmware or vendor compatibility with the host device if required by your platform. For critical installations, validate performance with a test link before large‑scale deployment.