Μονάδα πομποδέκτη SFP+ BlueOptics AFBR-710ASMZ 10000 Mbit/s 850 nm

The BlueOptics AFBR-710ASMZ is an SFP+ transceiver module designed for 10 Gbit/s short-range fiber connections using an 850 nm wavelength. It supports a maximum data transfer rate of 10000 Mbit/s and fits standard SFP+ ports, providing a compact optical interface for switches, routers and servers that require reliable high-speed communication over multimode fiber.

Advantages

This module offers compact SFP+ form factor compatibility with common networking equipment and delivers 10 Gbit/s throughput for demanding data links. Operating at 850 nm, it is suited for multimode fiber environments and provides stable optical transmission with low latency. The transceiver is designed to be hot-pluggable, enabling easy installation and replacement without powering down the host device.

Suitable for

• Short-range 10 Gbit/s links over multimode fiber in data centers
• Interconnects between switches, routers and uplink ports
• Server-to-switch connections requiring SFP+ modules
• Network upgrades where SFP+ hot-swappable transceivers are needed

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Wavelength: 850 nm suitable for multimode fiber
• Form factor: compact SFP+ optical transceiver
• Application: short-range optical links (multimode)

How to use

Install the BlueOptics SFP+ transceiver into a compatible SFP+ socket on the network device until it clicks into place. Connect the appropriate multimode fiber cable with matching connectors to the transceiver's optical port. Ensure the host device recognizes the module and configure the interface on the switch or server as required by your network settings. For removal, unlock and pull the module gently while the device is powered or follow the host’s hot-swap procedure.

Recommendations

Use the AFBR-710ASMZ with compatible multimode fiber (OM3/OM4 recommended for 10 Gbit/s links) and verify link parameters such as distance and loss budget before deployment. Avoid bending the fiber beyond manufacturer limits and confirm firmware or vendor compatibility if the host device enforces vendor locking.