Μονάδα πομποδέκτη SFP+ BlueOptics 3FE62600CA-BO 10000 Mbit/s

The BlueOptics 3FE62600CA-BO SFP+ transceiver module is a compact fiber optic module designed for 10 Gbit/s data transmission over single-mode fiber. Housed in a silver metal casing and weighing approximately 20 g, this SFP+ transceiver conforms to MSA mechanical standards and provides a reliable optical link for network devices that accept SFP+ modules. The module supports a maximum data transfer rate of 10000 Mbit/s and is intended for long-reach single-mode connections with LC duplex connectivity.

Advantages

The transceiver offers a metal housing for mechanical durability and electromagnetic shielding while keeping a low weight of 0.02 kg. With a stated mean time between failures (MTBF) of 1,000,000 hours, it is designed to deliver sustained operation and lower maintenance interventions. Compliance with SFP+ form-factor standards ensures compatibility with a broad range of devices that accept MSA-compliant SFP+ modules.

Suitable for

• 10 Gigabit Ethernet uplinks between switches and routers
• High-speed server-to-switch connections in data centers
• Longer-distance single-mode fiber links requiring LC duplex connectors

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Connector type: LC duplex (single-mode fiber)
• Housing material: metal (silver colour)
• Weight: 0.02 kg
• Reliability: MTBF approximately 1,000,000 hours

How to use

Install the BlueOptics SFP+ transceiver into any compatible SFP+ port following the host device manufacturer’s hot-plug or power-down instructions. Connect a single-mode LC duplex fiber patch cable to the module’s LC ports, ensuring correct transmit/receive orientation. Verify link status and speed on the host device; most systems will auto-negotiate or report a 10 Gbit/s link once the optical path is established. Follow the device firmware and vendor compatibility notes to ensure full functionality.

Recommendations

For optimal performance, use single-mode LC duplex fiber and quality patch cords appropriate for long-reach links. Confirm that the network hardware supports SFP+ modules and, if needed, Digital Diagnostic Monitoring (DDM/DOM) features to monitor optical parameters. Handle the transceiver and fiber connectors carefully to avoid contamination of optical surfaces and follow ESD precautions during insertion and removal.