Microconnect V-UTP601S-FLAT Καλώδιο δικτύου Μαύρο 1 m Cat6 U/UTP (UTP)

The Microconnect V-UTP601S-FLAT RJ-45 Cat6 1 m Black is a flat U/UTP Cat6 network cable with RJ-45 connectors on both ends, 1 meter in length and designed for installations where space is limited. It supports Cat6 performance and is backwards compatible with Cat5e and Cat5, with testing up to 250 MHz. The flat profile and black finish make it suitable for routing behind baseboards, under carpets or through narrow gaps in IT racks and cabinets.

Advantages

The flat construction reduces cable bulk and helps fit the cable into tight spaces while maintaining Cat6 signal performance. U/UTP shielding provides standard Category 6 electrical characteristics. RJ-45 connectors on both ends ensure compatibility with existing Ethernet equipment and support data rates up to 10000 Mbit/s as specified by the product. Each cable includes a strain-relief element on the connector to reduce the risk of connector damage during installation in confined areas.

Suitable for

• Routing behind skirting boards and under carpets
• Horizontal or vertical runs in crowded IT racks and cabinets
• Short patch connections between network devices and wall outlets

Key specifications

• Length: 1 m
• Standard: Cat6 (tested up to 250 MHz)
• Shielding: U/UTP
• Connectors: RJ-45 — both ends
• Maximum data rate (product spec): up to 10000 Mbit/s
• Colour: Black
• Weight: 0.02 kg
• MPN: V-UTP601S-FLAT
• EAN: 5704327885559

How to use

Connect one RJ-45 connector to a network port on your switch, router or computer and the other connector to the destination device or wall outlet. Route the flat cable along skirting boards, under carpets or through tight channels in racks and cabinets, ensuring the cable is not sharply kinked. Use the integrated strain relief when pulling the cable through narrow openings to protect the connector.

Recommendations

For optimal performance, keep the cable run within recommended length for patch cables, avoid tight bending radii and keep the cable separated from strong electrical noise sources. The cable is intended for indoor use and short patch connections; for permanent long-distance installations consider appropriate in-wall rated or shielded alternatives.